Oil Change Nut Size on a Subaru
The oil change nut size on a Subaru varies depending on the model. For a Subaru Forester, the oil drain plug has a thread size of M20-1.50 and a head size of 17 mm. Similarly, for a Subaru Outback, the oil drain plug is also M20-1.50 with a head size of 17 mm. It’s important to note that the size may vary depending on the specific model and year, so it’s advisable to verify the exact size for the particular Subaru model in question.
Contents
- What size bolt is a plug socket?
- What size socket is a Subaru?
- What size socket wrench do I need to change my oil?
- What size is a Subaru oil drain plug?
- What size nut do I need to change oil?
- What size socket for Subaru Outback oil plug?
- What size socket for Subaru plugs?
- What size is the oil drain plug on a Subaru Forester?
- Is 5 8 the same as 16mm?
- What size wrench do I need to remove an oil filter?
What size bolt is a plug socket?
M3.5 / 3.5mm
Spare screws for electrical plug socket outlets and light switch boxes, including longer screws (often needed after tiling a wall). Electrical socket boxes use a metric M3. 5 / 3.5mm size thread screw.
What size socket is a Subaru?
To remove and install Subaru lug nuts, you’ll need a 19mm socket. This fits the standard 12mm x 1.25 nuts. So the common socket sizes are: 12×1.25mm lug nuts: 19mm socket.
What size socket wrench do I need to change my oil?
Get a set that includes some metric and SAE sizes, and if you’re starting out, a 3/8” drive should do just fine. Ratchets and sockets also come in 1/4, 1/2″, 3/4″, and 1” drives.
What size is a Subaru oil drain plug?
Oil Drain Plug M16-1.50, Head Size 17Mm Compatible With Subaru.
What size nut do I need to change oil?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size socket for Subaru Outback oil plug?
Slide your drain pan into place. And use your ratchet and 17-millimeter socket to loosen the drain plug remove.
What size socket for Subaru plugs?
5. Remove The Spark Plugs. With a 14mm spark plug socket and short extension, remove the spark plugs.
What size is the oil drain plug on a Subaru Forester?
17 mm
Dorman – Standard Engine Oil Drain Plug: M20x1. 5 Thread, 17 mm Head, 1 Pack (Part No. 090-040CD)
Is 5 8 the same as 16mm?
16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch. 19mm = 3/4 inch.
What size wrench do I need to remove an oil filter?
Use with a 3/8″ drive tool or a 1″ wrench. Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2″ to 3-3/4″. Use with 3/8″ square drive tool.
