What size is the nut on a 2002 Chevy Trailblazer fan clutch?

The nut size on a 2002 Chevy Trailblazer fan clutch is 36mm.
To remove the fan clutch nut, you will need a 1/2″ drive socket and ratchet. These larger bolts have more torque, so you will need a tool that can exert more torque to break it free.
It’s important to note that there are different opinions and experiences regarding the removal of the fan clutch nut. Some users have mentioned using a pipe wrench and hammer to loosen the nut. Others have suggested using a 36mm crescent wrench. Additionally, there are specialized tools available, such as a fan clutch wrench or a chain strap wrench, that can be used to hold the pulley while removing the nut.
Please exercise caution and follow proper safety procedures when working on your vehicle.

Is a fan clutch left or right-handed thread?

Close the side of the blade. Being this side is on your left. Is regular threads lefty loosey righty tighty. If it was on your right side if the blade was facing. Orientated.

What size is the fan clutch nut?

The turning wrench has the 5 common fan clutch nut sizes built into one tool: 7/8″ (22 mm), 1 7/16″ (36 mm), 1 9/16″ (39 mm), 1 7/8″ (47 mm) and 2″ (50 mm). Both wrenches are long to provide extra leverage for stubborn fan clutch nuts. Made of heat treated alloy steel to provide strength.

What size wrench for Chevy fan clutch?

The fan clutch “nut” is 36 mm. You can use a 1 7/16″ wrench which will be loose but will work, or you can take a 1 3/8″ wrench and grind the open end to fit.

What size is the nut on a 2000 Chevy Blazer fan clutch?

The nut size is 36mm.

How do you remove a fan clutch nut?

The fan that is quite sizable. So with the just pull right on the fan out we can begin striking it downward. There we go came loose. Now we can remove our pipe wrench. Here.

Which way do you turn a fan clutch to remove it?

To remove the fan clutch, install a large crescent wrench onto the clutch’s nut, and hit it using a hammer to loosen the fan. If you are unsure about which way to loosen the fan nut, it’ll always loosen in the same direction as the fan when the engine is running.

Which way do you loosen a fan clutch nut?

So in order to do that it needs to spin this way. Right. So whatever way the fan needs to spin. That’s the way you hit it to loosen that nut so you can remove the fan so Fan’s been in this way.

How do you loosen a fan clutch nut?

The fan that is quite sizable. So with the just pull right on the fan out we can begin striking it downward. There we go came loose. Now we can remove our pipe wrench. Here.

How do you loosen a fan clutch?

You can use this which is a massive pipe wrench. We are going to put it on the water pump pulley here to hold it in place so we can get proper leverage. On our fan. Nut. Okay so now we need to put our

What tools do you need to remove a fan clutch?

And what i’m going to do is use the mallet. And just tap down on top of the wrench and then that should shock it. Off.