The Size of the Fuel Line Disconnect on a Ford
Based on the search results, the size of the fuel line disconnect tool for a Ford can vary. However, the most commonly mentioned size is 5/16″. It is important to note that there may be variations depending on the specific model and year of the Ford vehicle.
If you are having trouble disconnecting the fuel lines, it is recommended to use a specialized tool designed for this purpose. Ford Tool T90T-9550-B or C, or an equivalent tool, is commonly used to remove the retaining clips. These tools have a hinged center section that allows you to fit it around the fuel line.
It is also worth mentioning that using the correct tool and following proper safety precautions is crucial when working with fuel lines. Gasoline and other fuels are toxic and flammable, so it is important to keep cigarettes, sparks, open flames, and other sources of ignition away from the vehicle.
Please ensure that you have the appropriate tool and take the necessary safety measures when working with fuel lines on your Ford vehicle.
Contents
- What size tool is a Ford fuel line disconnect?
- What thread is used for gas fittings?
- What is a fuel line removal tool?
- What size are fuel fittings?
- What size line do I need for a fuel line?
- How to make a fuel line removal tool?
- How do you remove a fuel line with a disconnect tool?
- How do I disconnect my Ford fuel lines?
- What tubing to use for fuel line?
- Can I use 3 8 brake line for fuel line?
What size tool is a Ford fuel line disconnect?
5/16 x 3/8
CTA Tools 1810 Ford Fuel Line Disconnect Tool – 5/16 x 3/8.
What thread is used for gas fittings?
NPT fittings
NPT fittings are the most common threads used for general purposes and feature tapered threads used for joining and sealing the fittings for use with fluids like air or gas.
What is a fuel line removal tool?
The fuel line disconnect tool is a specialty device used to release fuel line connectors. The tool is normally designed to fit into tight places and disengage fuel line fittings near fuel filters, fuel sending units, and on the fuel rail.
What size are fuel fittings?
Understanding Fuel Line Fittings: Straight Thread (and AN) vs. Tapered Thread
| AN Size | Tube or Hose OD | Fitting Thread Size(SAE) |
|---|---|---|
| -10 | 5/8” | 7/8-14 |
| -12 | ¾” | 1-1/16-12 |
| -16 | 1” | 1-5/16-12 |
| -20 | 1 ¼” | 1-5/8-12 |
What size line do I need for a fuel line?
Recommended Size, Based on Horsepower
| Recommended Fuel Line Size (from the tank to the pump) | ||
|---|---|---|
| Engine Output | Size (inches) | Size (AN) |
| 350 hp or less | 5/16 in. | -5 |
| 350-450 hp | 3/8 in. | -6 |
| 450-650 hp | 1/2 in. | -8 |
How to make a fuel line removal tool?
Well is to take bicycle handlebar and cap. And all you do is cut a notch out of it using a dremel and then obviously cut the tabs there cut the tab. As well. And kind of shave down each of the tabs.
How do you remove a fuel line with a disconnect tool?
Then. Okay support it let me grab here. Okay I’ll push it in we push the tool all the way in okay check it out SoDo. In now holding the tool careful my split. View. Okay you start pulling it out.
How do I disconnect my Ford fuel lines?
Difficult. It’s going to take quite a bit of wiggling. Quite a bit of finagling. But eventually. Once you push down in the correct way the line will come apart.
What tubing to use for fuel line?
PTFE Lined Hose is the best soft hose you can use and generally has a braided stainless or braided nylon exterior. The PTFE liner blocks fuel vapors and slows the degradation process.
Can I use 3 8 brake line for fuel line?
If you get brake line in big enough diameter (5/16 or 3/8), it will hold up fine as a high pressure fuel line. Brake systems see way more pressure (1000-2000psi) than any fuel system produces (30-60psi).
