What size is the fan clutch nut on a 1998 Ford f150?

Based on the search results, the size of the fan clutch nut on a 1998 Ford F150 can vary. Here are the findings from the search results:
– According to a post on the Ford Truck Enthusiasts Forums, the size of the fan clutch nut for a 1997 F150 4.6 4WD (which is similar to the 1998 model) is not specified, but the user mentioned using two large crescent wrenches to remove it.
– Another post on the Ford F150 Forum mentioned that the fan clutch nut size for a 2007 F150 5.4 (which is a different model year but may have a similar size) is 47mm, according to a spec sheet on a replacement fan clutch at Rockauto.
– A post on the Ford Explorer Forum mentioned that the nut size on a new clutch is 36mm.
– A post on the Ford F150 Forum mentioned that the nut on the fan clutch is 1 1/2 inches (which is approximately 38.1mm) and that a special two-part wrench set is required to remove the cooling fan assembly.
– Another post on the F150online forum mentioned that the fan clutch nut size is 36mm/1 7/16″.
Based on these findings, it seems that the fan clutch nut size for a 1998 Ford F150 can range from 36mm to 47mm, or approximately 1 7/16″ to 1 1/2″. It is recommended to verify the specific size for your vehicle before attempting to remove the fan clutch nut.

Is a fan clutch left or right handed thread?

What’s up everyone here’s a quick video on how to tell if your fan clutch is Left-Handed threads or right-handed threads. Well you can actually tell by the way the fan blades are facing let me pull it

Which way do you turn a fan clutch to remove it?

And just tap down on top of the wrench and then that should shock it. Off. Of course while pushing on the wrench to rotate. It clockwise and there we go. That’s the fan clutch loose.

What size wrench is the Ford 7.3 L fan clutch?

1-7/8 inch
Application: 1998-2003 Ford vans and pickups with 7.3L direct-injected turbocharged (DIT) diesel engine. Wrench size 1-7/8 inch (47 mm). It is similar to Ford 303-591.

What size wrench for Ford 4.9 fan clutch?

Fan clutches can be a hassle to remove when you don’t have the appropriately size clutch wrenches. These clutch wrenches are 36 MM and 57 MM in width giving you the perfect size for work on Fords.

What size is the fan clutch nut on a 2004 Ford f150?

The fan clutch nut is 36mm. If you have an Autozone, Advanced Auto Parts or OReillys nearby you can rent the Ford fan clutch tool from them and get your money back when you return it.

What tools do you need to remove a fan clutch?

The fan clutch wrench fits over the large nut, then a long metal shaft fitted to an impact hammer slides into the slot. One short pull of the trigger is often enough to loosen the nut. For some manually operated fan clutch removal tools, a spanner that holds the water pump pulley in place comes with the kit.

What size is the fan clutch nut?

The turning wrench has the 5 common fan clutch nut sizes built into one tool: 7/8″ (22 mm), 1 7/16″ (36 mm), 1 9/16″ (39 mm), 1 7/8″ (47 mm) and 2″ (50 mm). Both wrenches are long to provide extra leverage for stubborn fan clutch nuts. Made of heat treated alloy steel to provide strength.

How tight should a fan clutch be?

I installed a new fan clutch. The bentley manual says to tighten the bolt by hand and then pound on the wrench once with your fist. It is supposed to be torqued to 40 lbs.

Is a fan clutch left or right-handed thread?

Close the side of the blade. Being this side is on your left. Is regular threads lefty loosey righty tighty. If it was on your right side if the blade was facing. Orientated.

What size is the fan clutch nut on a 2008 Ford f150?

The fan clutch nut is 36mm. If you have an Autozone, Advanced Auto Parts or OReillys nearby you can rent the Ford fan clutch tool from them and get your money back when you return it.