What size is the exhaust on a Dodge Charger?

The size of the exhaust on a Dodge Charger can vary depending on the specific model and trim level. However, based on the search results, it appears that the stock exhaust size for the Dodge Charger R/T is 2.25 inches. It’s worth noting that aftermarket exhaust systems are available for the Dodge Charger, allowing for customization and potential upgrades in size and performance.
Please keep in mind that this information is based on the search results provided and may not be exhaustive. It’s always a good idea to consult with a trusted mechanic or refer to the vehicle’s specifications for the most accurate and up-to-date information.

What is the diameter of the exhaust on a 2011 Dodge Charger?

From my 2016 r/t Road & Track. And what I just wanted to show today is what the stock diameter is of our exhaust. So I don’t know this shows it perfectly. But as you can see it is two and a quarter

How do I know what exhaust fits my car?

A good rule is to choose an exhaust pipe with a diameter proportional to your engine’s horsepower. However, ensure that the piping diameter is relatively wider than the stock. If your car’s engine has 400 horsepower, choose an aftermarket exhaust with a piping diameter of about 4′.

What exhaust size for horsepower?

A commonly used estimate is 2.2 CFM per flywheel horsepower. Another common estimate needed is the CFM per sq inch of tubing which is 115 CFM per Area in cubic inches.

How do I know my muffler size?

Good Way To Estimate: Take engine RPM x engine displacement, then divide by two. This is the intake volume. Use this same volume of air for the exhaust system, but then correct for thermal expansion (you need to know exhaust temps to figure things out).

What size is the exhaust pipe on a 2012 Dodge Charger RT?

Tubing Diameter: 2.50-in. Stainless mandrel bent tubing. Muffler Features and Benefits: Muffler Dimension: 4 x 9 x 18 in.

What size is the exhaust pipe on a 2013 Dodge Charger?

R/T exhaust is 2.25″….. R/T mids are 2.5″. you need 2.5″ if the cutouts are going on the mid pipes.

What size diameter is my exhaust?

You can just measure from the center of the pipe. From outside to outside and that’s gonna give you your diameter of the pipe or your inlet size for your exhaust tip.

What size pipe is used for exhaust?

The quick and easy way to choose what diameter pipe you will need from the headers to the mufflers is to go back to the old rule of thumb, that for every 100 horsepower = 1” of total pipe diameter is needed across the system. For example, a 500 horsepower engine needs a 2.5″ dual exhaust (2.5″ x 2 = 5″).

Is 2.5 or 3 inch exhaust louder?

3″ should be louder than 2.5″ if all parts are the same. If the muffler is raspy, you’ll hear more rasp at 3″.

What size is the exhaust on a Dodge Challenger?

5.7L HEMI: 2.25″ SRT-8: 2.5″ Hellcat: 2.75″ Demon: 2.75″