Drain Plug Sizes for Toyota Highlander
The drain plug sizes for a Toyota Highlander vary depending on the specific component. Here are the sizes for the different drain plugs:
– Oil Drain Plug: M12 x 1.25
– Transfer Case and Rear Differential Drain Plugs: M18 x 1.5
The length for the drain plugs is not explicitly mentioned in the provided search results.
If you need further assistance or information, feel free to ask!
Contents
- What size is the oil drain plug on a 2018 Toyota Highlander?
- Do all cars have the same size drain plug?
- What MM is an oil drain plug?
- How much oil does a 3.5 L Toyota Highlander take?
- Are all car oil drain plugs the same?
- What size is the Toyota engine oil drain plug?
- Where is the oil drain plug on a Toyota Highlander?
- What size is the oil drain plug on a Toyota Tacoma?
- How much oil does a 3.5 L v6 Toyota Highlander take?
- What size is a drain plug socket?
What size is the oil drain plug on a 2018 Toyota Highlander?
M12 x 1.25
Accufit – Oil Drain Plug, M12 x 1.25 (Part No.
Do all cars have the same size drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What MM is an oil drain plug?
According to rockauto.com, your drain plug should be an M12x1. 75 with a 15mm head.
How much oil does a 3.5 L Toyota Highlander take?
5.8 qt
Viscosity: SAE 0W-20. Capacity: 5.5L (5.8 qt) (When filter is removed.)
Are all car oil drain plugs the same?
Let’s get one thing straight: oil drain plugs are not universal. Just because an oil drain plug has the thread pitch you need for a vehicle, that doesn’t mean it will work with the oil drain pan.
What size is the Toyota engine oil drain plug?
It’s a 14 mm and if you’re not sure what size you need when going under the car, bring the socket set with you.
Where is the oil drain plug on a Toyota Highlander?
Alright so we’ll move down underneath the vehicle on the passenger side you can see the oil drain bolt here which is 14 millimeter and then the oil filter housing here.
What size is the oil drain plug on a Toyota Tacoma?
14 mm
Dorman – Standard Engine Oil Drain Plug: M12-1.25 Thread, 14 mm Head, 1 Pack (Part No. 090-038CD) This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
How much oil does a 3.5 L v6 Toyota Highlander take?
5.8 quarts
Oil Grade: API*
| Viscosity: | All TEMPS….0W-20 – 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change. |
|---|---|
| Capacity: | With filter 5.8 quarts. After refill check oil level. |
What size is a drain plug socket?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
