Based on the search results, it is unclear what the exact size of the drain plug on a Ford Ecosport is. However, there are some indications that the drain plug may have a head size of 15mm. It is recommended to consult the vehicle’s manual or contact a Ford dealership for the precise information regarding the drain plug size.
Contents
- What MM is an oil drain plug?
- How many quarts of oil does a Ford EcoSport take?
- Is there a standard plug size?
- What can I use instead of a drain plug wrench?
- Do all cars have the same size oil drain plug?
- What size socket do you need for a drain plug?
- Can I use an impact wrench to loosen oil drain plug?
- What size is the oil drain plug on a Ford?
- What size is the oil drain plug on a 2018 Ford Ecosport?
- What size wrench do I need to remove the oil drain plug?
What MM is an oil drain plug?
The Clean Oil Drain Plug are available in 3 different sizes: 12 x 1.25mm. 12 x 1.5mm. 12 x 1.75mm.
How many quarts of oil does a Ford EcoSport take?
Oil Grade: SEO18
| Viscosity: | Above -20 F .5W-20 – To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-20 oil meeting WSS-M2C947-A. |
|---|---|
| Capacity: | With filter 4.5 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…18 ft/lbs |
Is there a standard plug size?
For bathroom vanities the standard size is 1 1/2 inch. Manufacturers have also taken into account the old days where sizes were different again, so sink plugs are still available in: 1 inch, 1 1/4 inch, 1 3/8 inch, 1 5/8 inch, 1 7/8 inch, 2 inch, 2 1/4 inch, 2 3/8 inch and 2 1/2 inch sizes.
What can I use instead of a drain plug wrench?
needle-nose locking pliers
The best substitute for a plug wrench is a set of needle-nose locking pliers. The pliers need to be small enough to reach into the drain and through the cross. Once the locking pliers are secured, you use a pair of standard pliers to turn the locking pliers and loosen the drain.
Do all cars have the same size oil drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What size socket do you need for a drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
Can I use an impact wrench to loosen oil drain plug?
An impact could damage the gasket or crack the pan. If you do go with an impact, use heat and start with the smallest impact you have…a 1/4″ drive with an adaptor might do the trick. Move up to a 3/8″ after that, and a 1/2″ only as a last resort. Be as gentle as possible.
What size is the oil drain plug on a Ford?
M12 X 1.75
Engine Oil Pan Drain Plug – M12 X 1.75. FordUS.
What size is the oil drain plug on a 2018 Ford Ecosport?
Notes: Oil drain plug M12-1.75 pilot point, inset gasket slim flange.
What size wrench do I need to remove the oil drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.
