Based on the search results, the drain plug size on a Ford Bronco can vary depending on the specific model and year. Here are the relevant findings:
– According to a post on the Bronco Forum, the drain plugs in the floor plan of the truck are not deep enough to require anything more than just opening the door. It seems that there are no specific drain plugs for this purpose.
– In a post on the Bronco6G forum, it is mentioned that there are passive drain plugs in all 2- and 4-door Broncos. However, it is not specified what size these drain plugs are.
– Another post on the Bronco6G forum states that the actual drain plug size for a 2.3-liter Bronco is M12-1.75. It is recommended to use a 15mm wrench/socket to remove it.
– The Ford Bronco has ten interior drain plugs, according to a report from Ford Authority. Four of them are active, while the other six are passive. The report does not mention the specific size of these drain plugs.
Based on the available information, it is unclear what size the drain plug on a Ford Bronco is. It is recommended to consult the owner’s manual or contact a Ford dealership for accurate and specific information regarding the drain plug size for your particular model and year.
Contents
- What size socket is the oil drain plug?
- What size socket do I need to remove a drain plug?
- What tool should you use to loosen the oil pan drain plug?
- What can I use to remove a drain plug?
- Do all cars have the same size oil drain plug?
- What size is the drain plug on a Ford f150?
- What size is a plug socket?
- Where are the Bronco drain plugs?
- What size is oil drain screw?
- What size is the oil drain plug on a Ford?
What size socket is the oil drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size socket do I need to remove a drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.
What tool should you use to loosen the oil pan drain plug?
It. So we’re going to put our closed in wrench on it first because that provides a better purchase.
What can I use to remove a drain plug?
To remove a kitchen sink plug, follow these steps:
- Locate any screw or locking mechanism underneath the sink that secures the plug.
- If there’s no screw or lock, use pliers to grip and turn the plug counterclockwise.
- Apply a lubricant if it’s stuck due to corrosion, then twist or pull it out.
Do all cars have the same size oil drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What size is the drain plug on a Ford f150?
Dorman – Standard Engine Oil Drain Plug: M12x1. 75 Thread, 15 mm Head, 1 Pack (Part No. 090-175CD)
What size is a plug socket?
Use the following table to match plugs and sockets accordingly.
| 3 Pin | Plug | Socket |
|---|---|---|
| 16A | 43mm | 35mm |
| 32A | 57mm | 46mm |
| 63A | 69mm | 59mm |
| 125A | 80mm | 70mm |
Where are the Bronco drain plugs?
There are six passive plugs in the passenger area of the 4-door models and one in the jack compartment. These passive plugs carry over to Broncos with the washout floors as well.
What size is oil drain screw?
Oil Drain Plug Standard 7/8-16, Head Size 1-1/8 In.
What size is the oil drain plug on a Ford?
M12 X 1.75
Engine Oil Pan Drain Plug – M12 X 1.75. FordUS.
