The drain plug size on a 2018 Honda CR-V is not explicitly mentioned in the search results. However, it is common for Honda vehicles to have a drain plug size of 14mm. It is recommended to consult the vehicle’s owner’s manual or contact a Honda dealership for the exact drain plug size for the 2018 Honda CR-V.
Contents
- What is the common oil drain plug size?
- What size is a plug socket?
- Do all cars have the same size drain plug?
- What size wrench do I need to remove the oil drain plug?
- What size is the oil drain bolt on a 2018 Honda CRV?
- What size is the oil drain plug on a 2018 Honda Civic?
- What size socket is a car drain plug?
- What size is the oil drain plug on a Honda?
- What size is Honda oil drain bolt?
- What size socket for a Honda CRV oil plug?
What is the common oil drain plug size?
1 Answer. According to rockauto.com, your drain plug should be an M12x1. 75 with a 15mm head. If a 15mm wrench is not fitting onto it, get a new drain plug, then get the old one off using whatever method which will work (short of breaking something you still need!).
What size is a plug socket?
Use the following table to match plugs and sockets accordingly.
3 Pin | Plug | Socket |
---|---|---|
16A | 43mm | 35mm |
32A | 57mm | 46mm |
63A | 69mm | 59mm |
125A | 80mm | 70mm |
Do all cars have the same size drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What size wrench do I need to remove the oil drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.
What size is the oil drain bolt on a 2018 Honda CRV?
M14-1.5
Notes: Oil drain plug M14-1.5.
What size is the oil drain plug on a 2018 Honda Civic?
Notes: AutoGrade – (Carded), M14 x 1.50 Thread size. SAE/Metric 21 Head size. 0.6″ Shank Length.
What size socket is a car drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size is the oil drain plug on a Honda?
The plug size is 14mm but the head size is 17mm.
What size is Honda oil drain bolt?
The Honda Civic oil pan drain plug has a m14 X1. 50 bolt with a 17mm head. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours.
What size socket for a Honda CRV oil plug?
The back portion of the drain pan should be pointed towards the rear of the vehicle. This is done to catch the oil flowing from the oil drain hole once it is removed. Take the 17mm wrench or socket-ratchet and turn the engine oil drain bolt (Figure 9) counterclockwise.