What size is the drain plug on a 2013 Ford Edge?

Drain Plug Size for a 2013 Ford Edge
The drain plug size for a 2013 Ford Edge is M14-1.5. It has a 15 mm head size and a 1″ shank length.
When changing the oil in your 2013 Ford Edge, you will need a socket wrench with a 14mm hex to fit the oil drain plug. This size will work for all the drain plugs in the vehicle.
If you need to purchase a replacement oil drain plug, it’s important to ensure that it matches the specifications mentioned above to ensure a proper fit and seal.
If you have any further questions or need additional assistance, feel free to ask!

What size is the drain plug on a Ford Edge?

M12 x 1.75
Accufit – Oil Drain Plug, M12 x 1.75 (Part No. ODP-00009B)

How much oil does a 2013 Ford Edge take?

Capacity: With filter 6 quarts. After refill check oil level.

How much oil does a 2013 Ford Edge 2.5 take?

With filter 5.7 quarts.

What size is the oil pan nut on a 2013 Ford Edge?

Engine Oil Pan Drain Plug – M12 X 1.75.

What size socket do I need to remove a drain plug?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.

What size socket do you need for oil pan?

Re: what size wrench is needed for oil drain plug!
I have several pans from FE engines and there are both sizes 3/4″ (19mm) and 7/8″ (22mm). I think 7/8″ tends to be more common. I would suggest using a 6 point wrench if you have one.

What MM is an oil drain plug?

The Clean Oil Drain Plug are available in 3 different sizes: 12 x 1.25mm. 12 x 1.5mm. 12 x 1.75mm.

What size is the drain plug on a 2014 Ford Edge?

Notes: Oil drain plug M12-1.75 pilot point, inset gasket slim flange.

What size is a drain plug socket?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What can I use to remove a drain plug?

To remove a kitchen sink plug, follow these steps:

1. Locate any screw or locking mechanism underneath the sink that secures the plug.
2. If there’s no screw or lock, use pliers to grip and turn the plug counterclockwise.
3. Apply a lubricant if it’s stuck due to corrosion, then twist or pull it out.