What size is the drain plug on a 2008 Ford Taurus?

Drain Plug Size for 2008 Ford Taurus
The drain plug size for the automatic transmission on a 2008 Ford Taurus is 11mm. This is the lowest bolt visible when looking at the transmission from underneath.
For the engine oil, the drain plug head size is 15mm with M12-1.75 thread and an integrated gasket.
It’s important to use the correct size wrench or socket to avoid damaging the drain plug during maintenance.
If you have any more questions or need further assistance, feel free to ask!

What size socket do I need to remove a drain plug?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.

What can I use to remove a drain plug?

To remove a kitchen sink plug, follow these steps:

1. Locate any screw or locking mechanism underneath the sink that secures the plug.
2. If there’s no screw or lock, use pliers to grip and turn the plug counterclockwise.
3. Apply a lubricant if it’s stuck due to corrosion, then twist or pull it out.

How much oil does a 2008 Ford Taurus 3.5 take?

5.5 quarts
Capacity: With filter 5.5 quarts. After refill check oil level.

What size is the oil drain plug on a Ford?

M12 X 1.75
Engine Oil Pan Drain Plug – M12 X 1.75. FordUS.

What MM is an oil drain plug?

The Clean Oil Drain Plug are available in 3 different sizes: 12 x 1.25mm. 12 x 1.5mm. 12 x 1.75mm.

What are standard plug sizes?

The exact plug size will then depend on what kind of fitting the drain has, but 1 ¾ inches is usually considered the ‘standard’ size for modern plugs. Most hardware and DIY stores will offer a range of plugs to fit that size, so you can choose whatever style or colour plug that you wish.

What size is the drain plug on a Ford Focus 2008?

13mm is correct. 13mm, just did my oil two days ago.

What size is the oil drain plug on a 2008 Ford Edge?

Engine Oil Pan Drain Plug – M12 X 1.75. FordUS.

What size is a drain plug socket?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size is the oil drain plug on a 2008 Ford Taurus?

Dorman Engine Oil Drain Plug 65385
Notes: M12 x 1.75 thread.