Based on the search results, the drain plug size for a 2007 Honda Odyssey is M14-1.50 with a 17mm head size.
Contents
- What size is the oil drain plug on a 2007 Honda Odyssey?
- What size is Honda oil drain bolt?
- What size is a drain plug socket?
- What size is the oil pan socket on a Honda Odyssey?
- What is the common oil drain plug size?
- What size socket do I need to remove a drain plug?
- Where is the oil drain plug on a 2007 Honda Odyssey?
- How many quarts of oil does a 2007 Honda Odyssey take?
- How do you loosen an oil drain plug?
- What can I use to remove a drain plug?
What size is the oil drain plug on a 2007 Honda Odyssey?
Notes: AutoGrade – (Carded), M14 x 1.50 Thread size. SAE/Metric 21 Head size. 0.6″ Shank Length.
What size is Honda oil drain bolt?
The Honda Civic oil pan drain plug has a m14 X1. 50 bolt with a 17mm head. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours.
What size is a drain plug socket?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size is the oil pan socket on a Honda Odyssey?
Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack (Part No. 090-033.1)
What is the common oil drain plug size?
1 Answer. According to rockauto.com, your drain plug should be an M12x1. 75 with a 15mm head. If a 15mm wrench is not fitting onto it, get a new drain plug, then get the old one off using whatever method which will work (short of breaking something you still need!).
What size socket do I need to remove a drain plug?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.
Where is the oil drain plug on a 2007 Honda Odyssey?
And you’re gonna take out that drain plug. You’re gonna let the oil come out.
How many quarts of oil does a 2007 Honda Odyssey take?
4.5 quarts
Oil Grade: API*
| Viscosity: | All TEMPS….5W-20, 0W-20 – 0W-20 has been approved to be used in this application |
|---|---|
| Capacity: | With FLT, With filter 4.5 quarts. After refill check oil level. |
| Capacity: | With O FLT, Without filter 4.2 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…29 ft/lbs |
How do you loosen an oil drain plug?
So if you’re turning it to the right you want to tighten it if you want to turn it to the left you’re loosening. It.
What can I use to remove a drain plug?
To remove the stopper, you’ll need to go under the sink and unscrew the pivot rod arm connected to the sink drain pipe. You may need pliers or a wrench to help twist the arm off. Pull out the arm, including the round plug attached to it. Then, return to the sink and pull the stopper out.
