CV Axle Nut Size for a 2009 Chevy Impala
The CV axle nut size for a 2009 Chevy Impala varies depending on the source. According to the search results, the CV axle nut size for a 2009 Chevy Impala is either 33mm or 34mm. The driver’s side CV axle nut is smaller than the passenger side, and both nuts are either 33mm or 34mm in size [[3]].
It’s important to note that the information provided by different sources may vary, so it’s recommended to verify the specific size for the 2009 Chevy Impala in the vehicle’s manual or by consulting a certified mechanic for the most accurate information.
If you have any further questions or need additional assistance, feel free to ask!
Contents
- What is the torque on the axle nut on a 2009 Chevy Impala?
- What size bolt is on a CV axle?
- What size is the axle nut on a Chevy Impala?
- What size is the wheel axle nut?
- What size socket do I need for a CV axle nut?
- What size are axle bolts?
- How do I know my wheel nut size?
- What is a CV axle nut?
- What is the torque on the axle nut on a 2007 Impala?
- What size is the axle nut on a CV axle?
What is the torque on the axle nut on a 2009 Chevy Impala?
155 foot pounds
Torque the new Axel Nut to 155 foot pounds (have some apply the brake at this point).
What size bolt is on a CV axle?
As you have found, it is a M10X1. 5X25 grade 10.9 bolt.
What size is the axle nut on a Chevy Impala?
Dorman – Flanged Hex Spindle Nut M27-2.0 Hex Size 34mm (Part No. 615-144.1)
What size is the wheel axle nut?
36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.
What size socket do I need for a CV axle nut?
36mm is correct. Make sure it’s attached to a decent breaker bar; those things are on there pretty tight.
What size are axle bolts?
The standard axle bolts are 30mm long, but extra-long 35mm bolts are available for use with rear dropouts thicker than 10mm. They come with extra-long aluminum washers.
How do I know my wheel nut size?
You can easily identify your thread size and pitch with a simple thread pitch gauge available at any hardware store, or you can simply take one of your lug nuts to your local hardware store and spin it onto the bolts they have on hand.
What is a CV axle nut?
On some wheel bearings sets and hub units, the axle nut secures the outer flange to a CV joint or stub axle. As the nut is tightened, it pulls the flange and axle together to set the preload of bearings.
What is the torque on the axle nut on a 2007 Impala?
159 lb.ft
Axle nut torque: 159 lb. ft/216 Nm.
What size is the axle nut on a CV axle?
The stock one should thread on fine though so you can just reuse it if you don’t want to buy a second socket. OEM is 35mm, most aftermarket are 36mm.
