What size is the bolt on the front caliper of a 2003 Chevy Silverado?

Based on the search results, the bolt size on the front caliper of a 2003 Chevy Silverado can vary. Here are the findings:
– The caliper guide pins usually have either a 3/8 inch or a 5/16 inch allen head bolt.
– All Chevy Silverado models produced between 1999 and 2019 use a universal bolt size of about M14 x 2.00 x 37mm.
– Some users from the GM-Trucks forum mentioned that the 2006 Silverado brake caliper bracket bolt size, especially for the Silverado 1500, is 17mm.
– The caliper bolts on an 05′ Silverado were a T55 Torx head bolt.
It’s important to note that there may be variations depending on the specific model and trim level of the Silverado. To ensure accuracy, it is recommended to consult the vehicle’s manual or reach out to a certified Chevy mechanic for the exact bolt size for your specific Silverado model and year.

What size bolt is a 2003 Chevy Silverado caliper?

The Caliper to Bracket bolts are a pin that uses an 18mm socket or wrench. The bracket to knuckle bolts are a metric bolt, that use a 21mm wrench or socket.

What size bolt holds in a caliper bracket?

The bolt head size is the same for all bolts:22mm. The thread size, pitch, and length for the Caliper bracket bolts (2) are 14MM x 1.75 x 45mm. The thread size, pitch, and length for the bearing assembly bolts (3) are 14MM x 1.50 x 45mm.

What size is the brake caliper bolt on a 2003 Tahoe?

M14 x 2.00 x 39.75 mm.

What size is the bolt on the front brake caliper bracket of a Chevy Silverado?

M14 x 2.00 x 39.75 mm.

What size is the bolt on the front caliper of a 2002 Chevy Silverado?

M14 x 2.00 x 39.75 mm.

What tool do you use to remove caliper bolts?

The OTC 7302-1 allows for removal of inboard facing pins or bolts to be removed from the outboard side of the brake caliper or vehicle component. For caliper pin removal, simply back the pin bolt out half way and place the tool over the bolt shank to strike against the bolt head.

What size are disc brake caliper bolts?

Size ： M6 * 18mm，6 pieces. Weight ：6g (single). Screw head diameter: 6 mm.

What wrench do you need to remove a brake caliper?

Use sockets and a ratchet to remove the caliper from the suspension. You need a line wrench to remove the brake line from the top of the caliper before removing the caliper from the suspension. This slotted wrench can be slipped past the brake line but still have almost complete contact with the bleed nipple.

What are the bolts on a brake caliper?

The brake caliper bolt, also known as the caliper bracket bolt or the caliper mounting bolt, secures the brake calipers to the steering knuckle brackets.

What size socket do I need for brake calipers?

What size wrench do i need to take the front calipers off to replace my brake pads? Welcome and thank you for allowing me to assist you! to remove the caliper bolts from the bracket, you will need either a 13mm or 15mm socket wrench.