What size is the axle nut on a Subaru Outback?

Axle Nut Size for Subaru Outback
The axle nut size for a Subaru Outback is generally 32mm. This size is commonly used for the front and rear axle nuts on various Subaru models, including the Outback and Legacy.
It’s important to note that the specific size may vary slightly depending on the model year and any modifications made to the vehicle. However, the information from the sources indicates that 32mm is the standard size for the axle nut on a Subaru Outback.
If you have any further questions or need additional assistance, feel free to ask!

What size is the axle nut socket?

When removing, installing, and repairing hub or axle nuts on your vehicle, use the ABN Axle Nut Socket, 35mm, 1/2″ Inch Drive, 6 Point – Universal for All Vehicle 6pt. This package includes a single (1) 35mm socket, so you are not purchasing more than you need.

What size are the nuts on a Subaru Outback?

Subaru Outback Lug Nut Size
The lug nuts on most Subaru Outback models from 2010 to 2022 are 12×1.25mm. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.25mm.

What size is the axle nut on a 2011 Subaru Outback?

Break axle nut loose. It is a 32mm nut.

How do you remove an axle nut from a Subaru?

Go ahead and get your wheel and pop the center cap. Off. Go ahead and put the wheel back on and lower down the vehicle.

What size socket do you need for a CV axle?

36mm is correct. Make sure it’s attached to a decent breaker bar; those things are on there pretty tight.

What is the torque on the axle nut on a 2009 Subaru Outback?

Axle nut torque specifications: 162 ft-lb/220 Nm.

What size is Subaru axle nut?

32mm is what is for the impreza, don’t see why the legacy would be different.

How do you remove a stubborn axle nut?

And we just come up here. And oops switching hands and with very minimal. Effort. That’s all it takes to break that axle nut loose stupid easy work harder not smarter.

What size is the axle nut on a 2016 Subaru Outback?

32mm
Dorman – Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (Part No. 615-160)

What size nut is on a axle nut?

Most people use 32mm for the rear. It works but an 1-1/4 is a much better fit. Most people use 36mm for the front. It works but a 35mm is a much better fit.