What size is the axle nut on a Honda Civic Si?

The size of the axle nut on a Honda Civic Si can vary depending on the specific model and year. However, based on the search results, the most commonly mentioned sizes for the axle nut on a Honda Civic Si are 32mm and 36mm.
Here are some references from the search results:
– According to a post on the Honda-Tech forum, the axle/spindle nut size is 32mm.
– Another post on the ClubCivic.com forum also mentions that the axle nut size is 32mm.
– However, there are also mentions of the axle nut size being 36mm in some posts on the 8th Generation Honda Civic Forum and the 8th Generation Honda Civic Forum.
It’s important to note that there may be variations in the axle nut size depending on the specific model and year of the Honda Civic Si. Therefore, it is recommended to consult the owner’s manual or contact a Honda dealership for the exact axle nut size for a specific Honda Civic Si model and year.

What size socket is the axle nut on a 2003 Honda Civic?

Details. 1 1/4″ socket fits the 32mm spindle nut: torque to 134 lb-ft.

Are all axle nuts the same size?

Most people use 32mm for the rear. It works but an 1-1/4 is a much better fit. Most people use 36mm for the front. It works but a 35mm is a much better fit.

What size is the axle nut on a 1994 Honda Civic?

OEM HONDA CIVC EF/EG/EK INTEGRA DC2 32MM AXLE NUT.

What is the stock exhaust diameter of a 10th gen Civic Si?

aFe Power’s midpipe measured in at 2.5 inches outside diameter compared to the 2.1 inch stock size making it roughly 20% larger.

What size is the axle nut on a 10th Gen Si?

Member. 2020 has a 36mm axle nut.

What size is the drive shaft nut on a Honda Civic?

DRIVESHAFT AXLE HUB SPINDLE NUT (32MM) | HONDA CIVIC EG EK INTEGRA DC2.

What size is the axle nut socket?

36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.

What size are Honda wheel nuts?

M12 x 1.5, 19mm Hex Radius set of 16.

What size is the CV joint bolt?

CV Joint Bolt: 10mm x 23mm, Set of 6
There is a longer version of these same bolts (#22418) for the cars equipped with the flat style serviceable inner joints up to from 2003 on. Pre-1999 a 8mm short (#22365) and 8mm long (#12355) version were used.

What size is the axle nut on a Honda?

Yeah the correct size for the axle nut is 36mm.