What size is the axle nut on a Ford Fiesta?

The Axle Nut Size on a Ford Fiesta
The axle nut size on a Ford Fiesta is 32mm.
Additional Information
In addition to the axle nut size, it’s worth noting that the wheel nuts on a Ford Fiesta have a thread size of M12 x 1.5 and a hex size of 19.1mm. These specifications are important for changing a flat tire or replacing the wheels on your Fiesta.
If you’re planning to replace the axle nut, it’s recommended to use a 6-sided socket and a breaker bar for proper torque. The axle nut should be tightened to 280Nm.
Please let me know if there’s anything else I can help you with!

What size is the axle bolt?

The standard axle bolts are 30mm long, but extra-long 35mm bolts are available for use with rear dropouts thicker than 10mm. They come with extra-long aluminum washers.

What size socket do I need for an axle nut?

36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.

Where do I find my axle size?

Usually this is located on the driver’s side of the trailer. Another way we can determine which axle we need is by measuring the diameter of the axle.

What size is a wheel hub nut?

The front hub nut needs a 36mm socket, a new nut (they’re not re-usable) torqued to 184 ft-lbs, and new dust caps.

What size are the axle nuts on a 2016 Explorer?

M22 x 1.5mm
DTA D2637NUT x2-2 Front CV Axle Spindle Nuts Size M22 x 1.5mm Self Lock Style Compatible with 2013-2016 Escape 2011-2017 Explorer etc.

Do you need a torque wrench for axle nut?

Many technicians use an impact gun when installing an axle nut on a wheel hub bearing which not only overtightens the bearing but can also cause premature wear to the hub assembly. MOOG recommends using a torque wrench to tighten the axle nut accurately.

How tight do you tighten an axle nut?

install the hub and tighten the axle nut down until the hub is really hard to turn by hand. This will seat the bearings to where they need to be.

What size is the axle nut on a Ford Explorer?

M22 x 1.5mm
Notes: Axle Nut — M22 x 1.5mm. 2011-2019 Ford Explorer.

What is the torque for a front axle nut?

As the nut is tightened, it pulls the flange and axle together to set the preload of bearings. These axle nuts will have specifications as low as 130-ft. lbs. and as high as 300-ft.

What size is a CV axle nut?

35mm is the original size, which a 36 mm socket will work on, and most all new ones come with a 36mm nut.