What size is the axle nut on a Ford Explorer?

Axle Nut Size for Ford Explorer
Based on the information from various sources, the axle nut size for a Ford Explorer varies depending on the model and year. Here are the specific sizes mentioned:
– The front axle nut size for a 2006 Ford Explorer is 32mm.
– The rear axle nut size for a 2003 Ford Explorer is 35mm.
– The rear axle nut size for a 2004 Ford Explorer is 36mm.
– The front axle nut size for a 2007 Ford Explorer Sport Trac is 30mm.
It’s important to note that there are variations reported by different drivers, such as being able to use a 29mm socket for a more snug fit, so results may vary. When replacing the axle nut, it’s crucial to torque it to factory specification to avoid causing undue stress to the bearings.
If you have a specific model and year, it’s recommended to verify the axle nut size for that particular vehicle to ensure the correct fit and torque.
I hope this information helps you with your axle nut replacement! If you need further assistance, feel free to ask.

What can I use to remove an axle nut?

Go ahead and get your wheel and pop the center cap. Off. Go ahead and put the wheel back on and lower down the vehicle.

What size is the CV axle nut on a Ford Explorer?

M22 x 1.5mm
Notes: Axle Nut — M22 x 1.5mm. 2011-2019 Ford Explorer.

What size is the axle bolt?

The standard axle bolts are 30mm long, but extra-long 35mm bolts are available for use with rear dropouts thicker than 10mm. They come with extra-long aluminum washers.

What size is the axle nut on a 2016 Ford Explorer?

M22 x 1.5mm
DTA D2637NUT x2-2 Front CV Axle Spindle Nuts Size M22 x 1.5mm Self Lock Style Compatible with 2013-2016 Escape 2011-2017 Explorer etc.

What size nut is on a axle nut?

36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.

What size socket do I need to remove an axle nut?

There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.

What size socket is the axle nut on a 2003 Ford Explorer?

The 2003 Ford Explorer comes with a 32mm axle nut size. The axle nut is used to hold the wheel hubs and brake assembly to the axle.

What size socket is a Ford Explorer?

2 3/8-inch 6 point rounded socket for use on 1990 to current Ford Explorer, Ranger and Bronco II with automatic hubs.

What size is the axle nut on a 2008 Ford Explorer?

Go with 32 mm and you will be all set.

What size are the axle nuts on a 2015 Explorer?

M22 x 1.5mm
DTA D2637NUT x2-2 Front CV Axle Spindle Nuts Size M22 x 1.5mm Self Lock Style Compatible with 2013-2016 Escape 2011-2017 Explorer etc.