What size is the axle nut on a Chevy Trailblazer?

Axle Nut Size for Chevy Trailblazer
The size of the front axle nut for a Chevy Trailblazer varies slightly based on different factors. However, based on the information gathered, the most commonly cited size for the front axle nut on a Chevy Trailblazer is 36mm.
It’s important to note that there are mentions of variations in the size, with some sources indicating that the original equipment (OE) nut is 36mm, while aftermarket nuts may be 35mm. Additionally, there’s a mention of a 35mm socket being used for the axle nut removal.
Given the variations mentioned, it’s advisable to verify the specific size required for the particular Chevy Trailblazer being worked on, as there may be differences based on the model year or specific configurations.
If you have any further questions or need additional assistance, feel free to ask!

What size is the axle nut on a 2005 GMC Envoy?

Front Wheel Hub Bearing Assembly and Socket Kit – 3 Piece – with 36mm Axle Nut Socket – Compatible with 2002 – 2009 GMC Envoy 2003 2004 2005 2006 2007 2008.

What size socket do I need to remove an axle nut?

There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.

What size is the axle nut on a 2003 Chevy Trailblazer?

The lug nuts are 19mm, the axle nut is 36mm, the 3 bolts holding the hub on are 18mm, and the brake caliper bracket bolts are 15mm. You also need a hammer to knok the hub out of the knuckle. Good luck!

What size is the axle nut on a Trailblazer?

(1) 36mm Axle Nut Socket. 2002-09 Chevrolet Trailblazer Front Driver Side Wheel Bearing & Axle Socket Kit.

What size nut is on a axle nut?

36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.

What size are axle bolts?

The standard axle bolts are 30mm long, but extra-long 35mm bolts are available for use with rear dropouts thicker than 10mm. They come with extra-long aluminum washers.

What are the standard nut sizes?

Imperial (US) Nut Sizes:
Here you will find Standart (Imperial) nut dimensions for the next most popular sizes: #0, #1, #2, #3, #4, #5, #6, #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 3/4″, 7/8″, and 1″ for HEX, HEX Jam, Serrated Flange, and Nylon Lock types of nuts.

What size is an axle nut on a 2005 Trailblazer?

I suggest just getting the 36 mm. An original nut is bigger than an aftermarket. OE is 36 mm and aftermarket is 35 mm.

What size is the axle nut on a 2005 Chevy Trailblazer?

OE is 36 mm and aftermarket is 35 mm.

What can I use to remove an axle nut?

Go ahead and get your wheel and pop the center cap. Off. Go ahead and put the wheel back on and lower down the vehicle.