The axle nut size on a Chevy Equinox can vary depending on the specific model and year. Unfortunately, the search results provided do not directly mention the size of the axle nut for a Chevy Equinox. However, you may be able to find the information you need by referring to the owner’s manual or contacting a Chevrolet dealership or an auto parts store for assistance.
Contents
- What can I use to remove an axle nut?
- What size are axle bolts?
- What are the standard nut sizes?
- What is the torque on the axle nut on a 2011 Chevy Equinox?
- What size socket do I need to remove an axle nut?
- What is a CV axle nut?
- What is the torque on the axle nut on a 2010 Chevy Equinox?
- What size bolt is on a CV axle?
- How tight should axle nut be?
- What size nut is on a axle nut?
What can I use to remove an axle nut?
Go ahead and get your wheel and pop the center cap. Off. Go ahead and put the wheel back on and lower down the vehicle.
What size are axle bolts?
The standard axle bolts are 30mm long, but extra-long 35mm bolts are available for use with rear dropouts thicker than 10mm. They come with extra-long aluminum washers.
What are the standard nut sizes?
Imperial (US) Nut Sizes:
Here you will find Standart (Imperial) nut dimensions for the next most popular sizes: #0, #1, #2, #3, #4, #5, #6, #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 3/4″, 7/8″, and 1″ for HEX, HEX Jam, Serrated Flange, and Nylon Lock types of nuts.
What is the torque on the axle nut on a 2011 Chevy Equinox?
The torque for the axle nut is 205 Nm (151 lb ft).
What size socket do I need to remove an axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What is a CV axle nut?
On some wheel bearings sets and hub units, the axle nut secures the outer flange to a CV joint or stub axle. As the nut is tightened, it pulls the flange and axle together to set the preload of bearings.
What is the torque on the axle nut on a 2010 Chevy Equinox?
Notes: Axle Nut Torque Spec: tighten to 111 ft-lbs / 145Nm, then loosen 45 degrees and finally re-tighten to 185 ft-lbs / 250Nm.
What size bolt is on a CV axle?
As you have found, it is a M10X1. 5X25 grade 10.9 bolt.
How tight should axle nut be?
It can be different for different manufacturers. And also the torque spec can be a lot different anywhere from 95 foot-pounds all the way up to 250 foot pounds depending on the application.
What size nut is on a axle nut?
36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.
