Based on the search results, the size of the axle nut on a 2014 Ford Focus is 32mm.
Contents
- What size socket do I need to remove an axle nut?
- What size are the spindle nuts on a Ford Focus?
- What size nut is on a axle nut?
- What size is the axle bolt?
- What size is the axle nut on a CV axle?
- What size are Ford Focus wheel nuts?
- What size is the axle nut on a 2014 Ford Explorer?
- What is a CV axle nut?
- What can I use to remove an axle nut?
- What size socket is a 2014 Ford Focus lug nut?
What size socket do I need to remove an axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What size are the spindle nuts on a Ford Focus?
Thread size: M20-1.50.
What size nut is on a axle nut?
36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.
What size is the axle bolt?
The standard axle bolts are 30mm long, but extra-long 35mm bolts are available for use with rear dropouts thicker than 10mm. They come with extra-long aluminum washers.
What size is the axle nut on a CV axle?
The stock one should thread on fine though so you can just reuse it if you don’t want to buy a second socket. OEM is 35mm, most aftermarket are 36mm.
What size are Ford Focus wheel nuts?
Ford Focus wheel nuts specs for these are: 19mm Hex head. M12 x 1.5 thread. 60 degree taper with a 28mm diameter.
What size is the axle nut on a 2014 Ford Explorer?
M22 x 1.5mm
Notes: Axle Nut — M22 x 1.5mm.
What is a CV axle nut?
On some wheel bearings sets and hub units, the axle nut secures the outer flange to a CV joint or stub axle. As the nut is tightened, it pulls the flange and axle together to set the preload of bearings.
What can I use to remove an axle nut?
Go ahead and get your wheel and pop the center cap. Off. Go ahead and put the wheel back on and lower down the vehicle.
What size socket is a 2014 Ford Focus lug nut?
The lug nuts on a Ford Focus are M12 X1. 50 with a 19mm hex size. This means that the thread is M12, and they are 1.5 inches long. The 19mm hex size is the size socket that You will need to loosen and tighten the lugs.
