The axle nut size on a 2013 Dodge Dart varies depending on whether it is for the front or rear axle.
– The rear axle nut size is 32mm according to the factory specifications .
– The front axle nut size is 34mm.
Please note that it is always recommended to consult the vehicle’s manual or a certified mechanic for accurate and up-to-date information.
Contents
- What size socket do I need for a CV axle nut?
- How do I know my wheel nut size?
- What size is the front axle nut on a 2013 Dodge Ram?
- What size is the wheel axle nut?
- What size is the front axle nut on a 2014 Dodge Dart?
- What size socket is a Dodge Ram lug nut?
- Do you need a torque wrench for axle nut?
- Are all axle nuts the same size?
- How do I know my axle size?
- What size are front axles?
What size socket do I need for a CV axle nut?
36mm is correct. Make sure it’s attached to a decent breaker bar; those things are on there pretty tight.
How do I know my wheel nut size?
The thread size or thread diameter is the measurement taken across the outside diameter of your wheel stud threads measured in either standard (7/16″, 1/2″, etc.) or metric (12mm, 14mm, etc.) dimensions. The most common thread sizes are 10mm, 12mm, 14mm, 7/16″, 1/2″, 9/16″, 5/8″.
What size is the front axle nut on a 2013 Dodge Ram?
The 2013 Ram 2500 series has a 1 and 11/16 inch axle nut on it. This is a very large nut and it is designed to hold the wheel hub to the rest of the axle. Usually to find a socket large enough You will need to visit an automotive specialty tool store.
What size is the wheel axle nut?
36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.
What size is the front axle nut on a 2014 Dodge Dart?
We are now offering the OEM FRONT axle nut for the 2013-2016 Dodge Dart. Fits all automatic and manual transmission Darts. This is a 36mm nut, we do not offer the rear 32mm nut at this point in time.
What size socket is a Dodge Ram lug nut?
They use a M14X1. 50 lug nut, 22mm socket to remove.
Do you need a torque wrench for axle nut?
And the outer race of that wheel bearing in other words the preload. If. It’s not set properly well. You’re gonna have premature bearing wear and it’s gonna fail a lot sooner than it would naturally.
Are all axle nuts the same size?
Most people use 32mm for the rear. It works but an 1-1/4 is a much better fit. Most people use 36mm for the front. It works but a 35mm is a much better fit.
How do I know my axle size?
Usually this is located on the driver’s side of the trailer. Another way we can determine which axle we need is by measuring the diameter of the axle.
What size are front axles?
Thru-Axle Sizes
| Front Thru-Axle Size (Diameter x Width) | Used on |
|---|---|
| 12 x 110mm (Road Boost)* | Road |
| 15 x 100mm (non-Boost) | Mountain, Gravel, Road |
| 15 x 110mm (Boost) | Mountain |
| 20 x 100mm (non-Boost)* | Downhill |
