What size is Ford Fusion axle nut?

Ford Fusion Axle Nut Size
The size of the axle nut for a Ford Fusion varies depending on the model year and whether it’s for the front or rear axle. Here are the specific sizes based on the provided search results:
– For the front axle:
– The 2008 Ford Fusion has a 32-millimeter hex head axle nut.
– The 2013 Ford Fusion has a 34mm hex size for the front axle nut, although some users have reported that a 30mm size was easier to fit.
– A 2010 Ford Fusion requires a 32-millimeter axle nut socket.
– For the rear axle:
– The rear axle of a 2013 Ford Fusion is reported to have an official size of 32mm, but some users found that a 30mm size was easier to fit.
It’s important to use the correct size to ensure proper fitting and avoid damaging the nut.
If you need further assistance or information, feel free to ask!

What size socket do I need to remove an axle nut?

There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.

What is the torque specs for a axle nut?

On some wheel bearings sets and hub units, the axle nut secures the outer flange to a CV joint or stub axle. As the nut is tightened, it pulls the flange and axle together to set the preload of bearings. These axle nuts will have specifications as low as 130-foot pounds and as high as 300-foot pounds.

What size is a axle nut?

Most people use 32mm for the rear. It works but an 1-1/4 is a much better fit. Most people use 36mm for the front. It works but a 35mm is a much better fit.

What size is a Ford Fusion lug nut?

5 Lug Nuts – Replacement for 2006-2021 Ford Fusion, 2000-2023 Ford Focus, 2001-2023 Ford Escape Aftermarket Wheel – 5pcs Chrome Closed End Lug Nuts.

What size are Ford axle nuts?

36mm Axle Nut Socket – services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket – services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket – services many GM mid-size vehicles. 29mm Axle Nut Socket – services late model GM, Ford and Asian imports.

How do I identify my Ford axle?

To determine the axle ratio of your vehicle, locate the two-digit axle code first, then use your vehicle’s towing guide to find the axle ratio that corresponds to that code. If your vehicle has a limited-slip differential, it will be noted as “Limited Slip.”

What can I use to remove an axle nut?

Go ahead and get your wheel and pop the center cap. Off. Go ahead and put the wheel back on and lower down the vehicle.

What size socket do I need for wheel nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools.

What size is the axle nut on a 2008 Ford Fusion?

The 2008 Ford Fusion has a 32-millimeter hex head axle nut. In order to remove the axle nut You will have to jack the car up first period position the Jack in the appropriate spot according to which wheel You’re working on.

What size are the wheel nuts on a 2010 Ford Fusion?

Chrome Cone Seat Style Lug Nuts. M12 x 1.5. 13/16 Hex.