What size is Ford Focus lug nuts?

Ford Focus Lug Nut Size
The lug nuts on a Ford Focus are M12 X1.50 with a 19mm hex size. This means that the thread is M12, and they are 1.5 inches long. The 19mm hex size is the size socket that you will need to loosen and tighten the lugs.
When it comes to replacing or upgrading lug nuts for your Ford Focus, it’s important to choose the right size and always torque properly for safe operation. Most Ford Focus models from 2000 to 2023 use M12 x 1.5 wheel nuts, which have a 12mm diameter shank with a 1.5mm thread pitch. Spacers or adaptors may be required on certain models, so it’s advisable to confirm the thread specs in your owner’s manual.

Does Ford use metric or standard sockets?

metric
Are Ford bolts metric or standard? Yes. Ford has sourced both for various vehicle over the years. While it’s a general trend that the newest cars are all metric, there are stubborn applications where older “standard” bolts are still used.

What size lugs are on a 2014 Ford Focus?

The lug nuts on a Ford Focus are M12 X1. 50 with a 19mm hex size. This means that the thread is M12, and they are 1.5 inches long. The 19mm hex size is the size socket that You will need to loosen and tighten the lugs.

What size socket do I need for lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

Are Ford lug nuts metric or standard?

Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.

What size impact wrench do I need to remove lug nuts?

1/2 inch
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

What size are the lug nuts on a 2015 Ford Focus?

M12 x 1.5. 3/4 Hex.

What size socket is a Ford lug nut?

To remove and install Ford F150 lug nuts, you’ll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.

What size wrench for 2012 Ford Focus lug nuts?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex. Refer to your owner’s manual or wheel manufacturer’s guide for correct thread size, seat style, length, hex and torque specifications.

What size are the lug nuts on a 2018 Ford Focus?

M12 x 1.5. 3/4 Hex.

What size is a 2013 Ford Focus lug nut?

M12X1. 5 Lug Nuts – 20pcs OEM Wheel Lug Nuts Compatible with 2009-18 Focus/2012-18 Fusion/2013-2020 Escape/2018+ EcoSport/2011-19 Fiesta, Chrome Acorn Wheel Nuts.