The drain plug size for the Dodge Charger’s oil pan is 13mm.
Contents
- Are all drain plugs the same?
- Is there a standard plug size?
- What size socket is a drain plug?
- What size is the oil drain plug on a Dodge Challenger?
- How do I know my socket size?
- Do all cars have the same size drain plug?
- What size socket do I need to change my oil?
- What size is Dodge Charger oil drain plug?
- What size is oil pan bolt for Dodge Charger?
- What MM is a oil plug?
Are all drain plugs the same?
Let’s get one thing straight: oil drain plugs are not universal. Just because an oil drain plug has the thread pitch you need for a vehicle, that doesn’t mean it will work with the oil drain pan.
Is there a standard plug size?
For bathroom vanities the standard size is 1 1/2 inch. Manufacturers have also taken into account the old days where sizes were different again, so sink plugs are still available in: 1 inch, 1 1/4 inch, 1 3/8 inch, 1 5/8 inch, 1 7/8 inch, 2 inch, 2 1/4 inch, 2 3/8 inch and 2 1/2 inch sizes.
What size socket is a drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
What size is the oil drain plug on a Dodge Challenger?
^^ Correct, it’s 13mm. You’ll also need a 10mm to remove the splash shield.
How do I know my socket size?
Check the Markings: – Many bolts and nuts are marked with the size on the head or the side. Look for numerical markings such as 8mm, 10mm, 1/2 inch, etc. Metric sizes are often marked in millimeters, while imperial sizes are marked in fractions of an inch.
Do all cars have the same size drain plug?
There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.
What size socket do I need to change my oil?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.
What size is Dodge Charger oil drain plug?
Accufit – Oil Drain Plug, M14 x 1.5 (Part No. ODP-00007B)
What size is oil pan bolt for Dodge Charger?
Replace the worn-out or damaged plug in your Charger with this new Oil Drain Plug featuring pilot point style with a thread size of M14-1.50. The precise thread diameter, thread pitch, and the 16 mm hex design plug up the hole in the drain pan perfectly.
What MM is a oil plug?
The Clean Oil Drain Plug are available in 3 different sizes: 12 x 1.25mm. 12 x 1.5mm. 12 x 1.75mm.
