What size is a Honda Fit lug nut?

The lug nut size for a Honda Fit is M12 x 1.5 with a 3/4 inch hex size.
Please note that the lug nut size can vary depending on the model year and trim level of the Honda Fit. It is always recommended to double-check the specific lug nut size for your vehicle to ensure compatibility.

Do you need a special socket to remove lug nuts?

Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.

What size socket is a 2009 Honda Fit lug nut?

M12 x 1.5. 3/4 Hex.

What size socket is a 2010 Honda Fit lug nut?

3/4 Hex
M12 x 1.5. 3/4 Hex.

What size socket is a 2016 Honda Fit lug nut?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex.

What size are the lug nuts on a 2018 Honda Fit?

12 mm x 1.50 thread size, 19 mm and 21 mm hex, 1.28″ length.

What size are the lug nuts on a 2014 Honda Fit?

The Honda Fit comes equipped with 12mm x 1.5 lug nuts from the factory. This size is standard across all Honda Fit models, regardless of the year or trim level.

What size is the wheel nut on a Honda Fit?

For Honda Fit 2006-2020 Wheel Nut | Front/Rear | M12-1.50 Bulge | 19mm Hex | 19.5mm Length | Chrome | Steel – Replacement For 90304-SC2-000 | 90304-SC2-003.

What size are the wheel nuts on a 2013 Honda Fit?

Thread size: M12-1.50.

What size socket is a 2015 Honda Fit lug nut?

Notes: Kit. 12 mm x 1.50 thread size, 3/4″ and 13/16″ hex.

What size socket do I need to remove wheel nuts?

19mm socket is what you need – locking nut and standard all the same size.