Subaru CVT Transmission Drain Plug Size
The drain plug size for a Subaru CVT transmission varies depending on the specific model and year. Here are some insights from the search results:
– The front differential of the CVT transmission in 2014 to present Outbacks and Foresters uses a special 1/2x20x3/4 cap screw as the fill and drain plug.
– For the Subaru Outback, there is a T70 Torx bit required for the front differential drain plug, and a 17mm (or 19mm) wrench or socket for the automatic transmission drain plug.
– The original equipment Subaru transmission drain plug fits all five-speed and six-speed WRX and STI Subaru manual transmissions from 2002 and newer, and likely most other Subaru transmissions of similar vintage.
– A T70 Torx size is needed for the transmission flushes on a variety of Subaru transmissions, and it is a 2-piece construction with hardened tool steel bit.
– The CVT transmission drain plug of a Subaru Outback requires a torx screwdriver for removal, and the fill plug needs to be torqued to 36.9 ft-lb.
Based on the information available, the drain plug size for a Subaru CVT transmission can vary, and it is essential to refer to the specific model and year to determine the correct size.
If you need further assistance or specific information for a particular Subaru model, it’s recommended to consult the vehicle’s manual or contact a Subaru dealership for accurate details.
Contents
- What size is a Subaru drain plug?
- How often should Subaru CVT transmission fluid be changed?
- What size is the oil drain plug on a 2018 Subaru?
- How many quarts does a Subaru CVT transmission take?
- What size is the drain plug on a 2018 Subaru Outback?
- What size socket for Subaru plugs?
- Is Subaru CVT fluid lifetime?
- What size is the crush washer Subaru crosstrek?
- Can you use any washer as a crush washer?
- What size is a drain plug socket?
What size is a Subaru drain plug?
16X17
Plug 16X17 – Genuine Subaru Part.
How often should Subaru CVT transmission fluid be changed?
once every 30,000 to 60,000 miles
Subaru CVT Transmission Fluid Service Special
Amongst all the different services your vehicle needs, some are needed more frequently than others. For instance, Transmission Fluid Services vary from make to model and driver to driver, but typically the range is once every 30,000 to 60,000 miles.
What size is the oil drain plug on a 2018 Subaru?
Head size (SAE/metric): 17 mm. Thread size: M16 – 1.5.
How many quarts does a Subaru CVT transmission take?
Also for a pan drain and fill you’re only going to use around 7 qt, maybe less.
What size is the drain plug on a 2018 Subaru Outback?
M20 x 1.50 thread. Shank length: 0.512″. Head size (SAE/metric): 17 mm.
What size socket for Subaru plugs?
5. Remove The Spark Plugs. With a 14mm spark plug socket and short extension, remove the spark plugs.
Is Subaru CVT fluid lifetime?
Subaru of America DOES tell you to change the CVT fluid every 25k miles.
What size is the crush washer Subaru crosstrek?
RubySu the crush washer size is 16x21x2 that is what is written on Subaru pack.
Can you use any washer as a crush washer?
You can use a copper or nylon washer if it fits properly. If you must, use the aluminum washer over again at the risk of a very slight leakage.
What size is a drain plug socket?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
