Bulb Size for Subaru Impreza Headlight
The bulb size for the headlight of a Subaru Impreza can vary depending on the model year and the type of bulb used. Here are the bulb sizes for different model years:
– For the 2018 Subaru Impreza, the low beam uses H11 bulbs and the high beam uses 9005 type bulbs.
– Older models may use H7 bulbs for the low beam and 9005 type bulbs for the high beam.
It’s important to note that the bulb size may vary for aftermarket headlights, fog lights, and other assemblies, so it’s recommended to use the bulb finder system to get the specific bulb size for your Subaru Impreza.
If you have a specific model year in mind, please let me know, and I can provide more detailed information.
Contents
- Is H11 a high or low beam?
- Are H11 and 9005 the same?
- How do you change a headlight on a 2018 Subaru Impreza?
- What size bulb for 2018 Subaru Impreza?
- What is the difference between H11 and 9005 bulb?
- Does the 2008 Subaru Impreza require a certain type of headlight?
- What does H11 headlight fit for?
- What is my headlight bulb size?
- What’s the difference between H11 and 9005?
- Can I use 9005 instead of H11?
Is H11 a high or low beam?
H11 bulbs utilize a default wattage of 55 watts, making them ideal for low beams and fog lights. 9005 bulbs produce up to 65 watts, which is commonly used for far-reaching high beams.
Are H11 and 9005 the same?
A: No, 9005 and H11 bulbs are not directly interchangeable. Despite their similar L-shaped designs, 9005 and H11 bulbs have different wattages and light outputs. They will not work properly in each other’s sockets.
How do you change a headlight on a 2018 Subaru Impreza?
Once you have carefully pulled the connector. Free then you can twist the bulb counterclockwise. To remove and gently pull out of the assembly. It’s that simple to install your replacement.
What size bulb for 2018 Subaru Impreza?
Subaru Impreza (2017-2020) Bulb Size Chart
| Headlights (High Beam) | 9005 (HB3) |
|---|---|
| Side Marker Light (Rear) | T10 (194 168) |
| Turn Signal Light (Rear) | 7443 (7440) |
| Tail Light | T10 (194 168) |
| Trunk Light (2017-2019) | T10 (194 168) |
What is the difference between H11 and 9005 bulb?
The H11 is a single low beam light, whereas the 9005 is high beam light with a high illumination capability. They also have varying degrees of energy consumption; the 9005 being on the higher side with 65W, and the H11 has a 55W rating. The 9005 to H11 conversion is possible, with minor modifications.
Does the 2008 Subaru Impreza require a certain type of headlight?
the H11 at 55W/1350 lumens.
What does H11 headlight fit for?
N52 Series H11 LED bulb is fit for
2003-2021 Chevrolet (model: Silverado 1500/2500/3500, Tahoe, Malibu, SS, Sonic, Colorado etc.) 2005-2021 Ford (model: Ranger, Focus, Fusion, Edge, F-150, Escape, Expedition, Transit-150/250/350 etc.) 2004-2021 Toyota (model: Camry, Sienna, 4Runner, Tacoma, Prius etc.)
What is my headlight bulb size?
Every headlight is designated with a bulb size. For a bulb installed in your car, you can find the number stamped or printed on the side of the bulb. It’s also listed in the service manual and in an auto bulb guide. Only the correct bulb size will fit in the headlamp housing and connect to the factory wiring.
What’s the difference between H11 and 9005?
The H11 is a single low beam light, whereas the 9005 is high beam light with a high illumination capability. They also have varying degrees of energy consumption; the 9005 being on the higher side with 65W, and the H11 has a 55W rating.
Can I use 9005 instead of H11?
You cannot fit a 9005 (HB3) into an H11 headlight. You also cannot fit an H11 into a 9005 (HB3) headlight. As explained in previous sections, each bulb has its unique locking tabs, plugs, and size which make them incompatible and not interchangeable.
