AHG Auto Service » Make » Honda » What size bulb for Honda City 2012?

What size bulb for Honda City 2012?

Bulb Size for Honda City 2012
The stock headlight bulb size for the 2012 Honda City is H8 12V/35W. This information is specific to the original factory (OEM) assemblies of the 2012 Honda City.
It’s important to note that if there are aftermarket headlights, fog lights, or other lighting components installed, the bulb sizes may differ as per the manufacturer’s specifications. Therefore, it’s recommended to verify the specific bulb type based on the owner’s manual or stock lamps before making a purchase.

Is H11 and 9005 same bulb?

A: No, 9005 and H11 bulbs are not directly interchangeable. Despite their similar L-shaped designs, 9005 and H11 bulbs have different wattages and light outputs. They will not work properly in each other’s sockets.

What will a H11 bulb fit?

H11 is one of the most common bulb sizes and is used for high beam, low beam, and fog lights by nearly every car manufacturer. H11B, on the other hand, is a lot less common and can be found on Hyundai and KIA cars in the low beams.

What size light bulb for Honda City?

110W/set 12000LM/set 6000K White. Application Tips: Bulb size:9005 HB3 High Beam + H11 Low Beam + H11/H16 LED Fog Light Bulbs ,Sutiable for HONDA CITY 2015-2020.

Is an H11 bulb the same as a 9006?

The short answer is no. While both bulb types are commonly used for low beams and fog lights, 9006 and H11 bulbs have different sizes and connections. So they are not interchangeable.

How do I know what size bulb I need?

Numbers in a bulb code indicate size in millimeters or eighths of an inch. These codes will tell you if a bulb will fit in your fixture and if it’s the right shape. For every light fixture or application, there’s going to be a specific bulb or light bulb shape that will fit best and provide the right type of light.

What is my headlight bulb size?

Every headlight is designated with a bulb size. For a bulb installed in your car, you can find the number stamped or printed on the side of the bulb. It’s also listed in the service manual and in an auto bulb guide. Only the correct bulb size will fit in the headlamp housing and connect to the factory wiring.

Can I use 9005 instead of H11?

You cannot fit a 9005 (HB3) into an H11 headlight. You also cannot fit an H11 into a 9005 (HB3) headlight. As explained in previous sections, each bulb has its unique locking tabs, plugs, and size which make them incompatible and not interchangeable.

What’s the difference between H11 and 9005?

The H11 is a single low beam light, whereas the 9005 is high beam light with a high illumination capability. They also have varying degrees of energy consumption; the 9005 being on the higher side with 65W, and the H11 has a 55W rating.

What size bulb for Honda City 2010?

Bulb size:9003/H4 High Beam and Low Beam Bulbs +H11/H8 LED Fog Light Bulbs,Sutiable for HONDA CITY 2010-2014.

Do I need H11 or 9005?

H11 bulbs are typically used in low-beam headlights, while HB3 (9005) bulbs are used in high-beam headlights. The two types of bulbs have different bases and are not interchangeable without modification to the headlight assembly.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment