What size bolt is on the oil pan in a 2008 Honda Odyssey?

The size of the bolt on the oil pan of a 2008 Honda Odyssey is not explicitly mentioned in the search results. However, it is worth noting that the search results provide information on the torque specs for the oil pan bolts. According to one of the search results, the bolts should be tightened in three stages: 3 ft/lb, 6 ft/lb, and finally 8.7 ft/lb.
If you need specific information about the size of the bolt on the oil pan, it is recommended to consult the vehicle’s owner’s manual or contact a Honda dealership for accurate and detailed information.

What MM is a oil drain plug?

Measure Diameter
If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.

What size is the oil pan bolt on a Honda?

The honda civic oil pan drain plug has a m14 x 1.50 Bolt with a 17mm head.

What size is the oil pan socket on a Honda Odyssey?

Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack (Part No. 090-033.1)

What size is a 2008 Honda Accord oil drain plug?

Notes: Oil drain plug M14-1.50 magnetic.

Are all oil drain bolts the same size?

It is not too difficult to measure the size if you get the right tools. Generally, oil drain plugs do only come in a couple of sizes. A given car maker would generally use the same size plug in all their cars, it’s cheaper and easier that way. Some oil plugs are marked with sizes on the surface, like M12x1.

What size is the oil drain plug on a 2008 Honda Odyssey?

Notes: AutoGrade – (Carded), M14 x 1.50 Thread size. SAE/Metric 21 Head size. 0.6″ Shank Length.

What size socket do I need for the oil pan bolt?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

What size socket is the oil drain plug?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.

What size is the drain plug on a 2007 Honda Odyssey?

Length: 1.71 in. Hex Size: 0.5 in.

What size is the oil drain plug on a 2007 Honda Odyssey?

Notes: AutoGrade – (Carded), M14 x 1.50 Thread size. SAE/Metric 21 Head size. 0.6″ Shank Length.