Subaru BRZ Brake Caliper Bolt Size
The bolt size for the Subaru BRZ brake caliper is M12x29, flanged. This bolt is used to attach the caliper bracket to the spindle. It’s important to use the correct size and type of bolt for this application to ensure proper functionality and safety.
Additionally, the torque specification for the front brake caliper mounting bolt, which connects the caliper assembly to the support, is 88.5 ft/lbs. This torque specification is crucial for ensuring the proper installation and function of the brake caliper.
It’s worth noting that these specifications are specific to the Subaru BRZ model and are essential for maintaining the vehicle’s braking system.
Contents
- What diameter are gt86 brake discs?
- Are all brake calipers the same size?
- What size are brake caliper bracket bolts?
- What are the bolts on a brake caliper?
- What wrench do you need to remove a brake caliper?
- What size socket do I need for brake calipers?
- What size are the caliper bolts on a gr86?
- What tool do you use to remove caliper bolts?
- What grade are caliper bracket bolts?
- Are brake calipers one size fits all?
What diameter are gt86 brake discs?
Disc diagram and key
| TAROX Code | 2743 |
|---|---|
| Disc Diameter | 290 |
| Disc Thickness | 18.0 |
| Minimum Disc Thickness | 16.0 |
| Offset (Disc Height) | 63.6 |
Are all brake calipers the same size?
Brake calipers vary based on a vehicle’s purpose.
What size are brake caliper bracket bolts?
caliper bracket bolts are M12x1. 5×45 grade 10.9.
What are the bolts on a brake caliper?
The brake caliper bolt, also known as the caliper bracket bolt or the caliper mounting bolt, secures the brake calipers to the steering knuckle brackets.
What wrench do you need to remove a brake caliper?
Use sockets and a ratchet to remove the caliper from the suspension. You need a line wrench to remove the brake line from the top of the caliper before removing the caliper from the suspension. This slotted wrench can be slipped past the brake line but still have almost complete contact with the bleed nipple.
What size socket do I need for brake calipers?
What size wrench do i need to take the front calipers off to replace my brake pads? Welcome and thank you for allowing me to assist you! to remove the caliper bolts from the bracket, you will need either a 13mm or 15mm socket wrench.
What size are the caliper bolts on a gr86?
With the 2nd gen BRZ, the install is a bit more involved since it requires the hub to be removed in order to fit extended studs due to the size of the aluminum knuckle, and the brake caliper bolts are 19mm bolts versus the 17mm ones that the previous gen Toyota uses.
What tool do you use to remove caliper bolts?
The OTC 7302-1 allows for removal of inboard facing pins or bolts to be removed from the outboard side of the brake caliper or vehicle component. For caliper pin removal, simply back the pin bolt out half way and place the tool over the bolt shank to strike against the bolt head.
What grade are caliper bracket bolts?
Product Specifications
| Bolt Grade: | 10.9 |
|---|---|
| Thread Length: | 40.64 mm |
| Thread Type: | Coarse |
| Washers Included: | Yes |
| Packaging Type: | Bag |
Are brake calipers one size fits all?
Space for the calipers varies by wheel design. Two wheels with the same offset, same diameter, and same width will yield two different fitments. One that does fit over the brakes, and one that does not.
