What size bolt is a 2003 Ford Escape caliper?

Bolt Size for 2003 Ford Escape Caliper
The bolt size for the caliper on a 2003 Ford Escape varies based on different sources and model years. Here’s a summary of the information from the search results:
– The caliper bracket bolts for a 2007 Ford Escape are 18mm and the slide pins are 7mm hex.
– For a 2010 Ford Escape, a 7mm allen wrench fits the front brake caliper bolts.
– A 2006 Ford Escape has caliper bolts that are 7mm hex.
– The front brake caliper bolt size for a 2008 Ford Escape is approximately 3/4″.
– The fronts are 9mm and the rears are 7mm for a 2006 Ford Escape.
– The proper size for a Ford Escape caliper is 9mm for a 2010 model and 7mm for a 2010 model.
Based on the information provided, it seems that the bolt size for the caliper on a 2003 Ford Escape may be 7mm or 9mm. It’s important to verify the specific model year to ensure the correct size is used.

What is a caliper mounting bolt?

Caliper mounting bolts attach the caliper bracket to the steering knuckle in both cars and trucks.

What size hex are Ford Escape brake calipers?

3/8 Inch Drive 9mm Brake Caliper Hex Bit Mercedes, Ford Escape & Expedition | Li.

What size bolt holds in a caliper bracket?

The bolt head size is the same for all bolts:22mm. The thread size, pitch, and length for the Caliper bracket bolts (2) are 14MM x 1.75 x 45mm. The thread size, pitch, and length for the bearing assembly bolts (3) are 14MM x 1.50 x 45mm.

What wrench do you need to remove a brake caliper?

Use sockets and a ratchet to remove the caliper from the suspension. You need a line wrench to remove the brake line from the top of the caliper before removing the caliper from the suspension. This slotted wrench can be slipped past the brake line but still have almost complete contact with the bleed nipple.

What size socket do I need for brake calipers?

What size wrench do i need to take the front calipers off to replace my brake pads? Welcome and thank you for allowing me to assist you! to remove the caliper bolts from the bracket, you will need either a 13mm or 15mm socket wrench.

What size bolt is a 2003 Ford Escape brake caliper?

You need a 9mm allen key for the caliper guide pins, which can be found at sears, in the craftsman tool section. Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.

What size are the caliper bolts on a 2006 Ford Escape?

Best Answer
The caliper bolts are 7mm hex.

What tool do you use to remove caliper bolts?

The OTC 7302-1 allows for removal of inboard facing pins or bolts to be removed from the outboard side of the brake caliper or vehicle component. For caliper pin removal, simply back the pin bolt out half way and place the tool over the bolt shank to strike against the bolt head.

What size is a brake wrench?

Several styles exist, but determining which brake line wrench is right for my vehicle isn’t really that hard. Most domestic cars use a 7/16-in. size, while imports typically use a 10 mm.

What size are disc brake caliper bolts?

– Disc brake caliper mounting bolt from Magura. – Steel construction for maximum durability. – M6 x 16mm size is ideal for disc brake mounting bolts, but also works for other applications.