The lug nut size for Subaru vehicles is generally M12-1.25 with a 19mm hex size . It’s important to note that certain Subaru models may have a locking lug nut, which requires a special key for removal. It’s recommended to use OEM Subaru lug nuts or high-quality aftermarket nuts in the proper size.
Contents
- What size bolts for lug nuts?
- What size thread is a Subaru wheel stud?
- Are all Subaru wheel studs the same?
- How do I know my wheel bolt size?
- Are Subaru lug nuts metric or standard?
- What are the most common bolt sizes on a Subaru?
- What size socket do I need to remove Subaru lug nuts?
- What size socket is my lug nut?
- What size socket do I need to remove wheel nuts?
- What size is a Subaru lug nut?
What size bolts for lug nuts?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size thread is a Subaru wheel stud?
Nearly all Japanese cars use 12mm lug nuts and studs. This is the diameter of the threaded section of the stud. Subaru and Nissan do something a little different than the other manufacturers; they use a 1.25 thread pitch. All of the other Japanese manufacturers use a 1.5 thread pitch.
Are all Subaru wheel studs the same?
No, not all Subaru lug nuts are the same. There are various wheel nuts for Subaru in the market. Most Subaru vehicles use steel wheel nuts. The most common thread sizes that are used by Subaru cars are M12x1.
How do I know my wheel bolt size?
Because. It’s an even bolt pattern four lug 6 lug 8 lug even numbers you can use a basic tape measure. And from the center of one stud. Go across the circle. To the center of it the other stud.
Are Subaru lug nuts metric or standard?
Yes, almost all Subaru cars use metric bolts. The thread sizes of the lug nuts will vary based on the wheel studs. Therefore, you need metric Subaru lug nuts to fully secure the wheels. For example, the most common metric thread sizes of Subaru bolts are M12x1.
What are the most common bolt sizes on a Subaru?
Most bolts on the body are 10,12,14,17mm. When you wrench on a Subaru as long as I have, you can just look at the bolt and immediately know whether it’s an 8, 10, 12, 14, 17, 18, etc. If they’re fastener bolts, 8, 10, 12, 14 are going to be your standard.
What size socket do I need to remove Subaru lug nuts?
To remove and install Subaru lug nuts, you’ll need a 19mm socket.
What size socket is my lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket do I need to remove wheel nuts?
OEM wheel bolts are usually 19mm socket, but many aftermarket ones are 17mm. Look for impact sockets with a plastic sleeve to help protect your wheels. You wouldn’t need all 3, but something like this…. they are usually 1/2″ drive with the sleeve though.
What size is a Subaru lug nut?
Subaru 12 mm x 1.25 Size Car & Truck Wheel Lug Nuts.
