The size of Toyota brake line fittings is 10mm x 1.0 [[7]].
Contents
- What are the two types of brake line fittings?
- Are all brake line fittings the same?
- What size brake line fittings are on a 2001 Toyota Tacoma?
- What size fittings do I need for brake lines?
- What thread is used on brake line?
- What size thread is a 3 8 brake line?
- What is the most common brake line nut size?
- What size are Toyota brake line nuts?
- What size thread is a 1 4 brake line?
- What brake line flare does Toyota use?
What are the two types of brake line fittings?
There are two basic types of passenger vehicle brake line flares: the double flare (also called the inverted flare) and the bubble flare (also known as the metric flare). It is important to know that these two flare forms are not interchangeable.
Are all brake line fittings the same?
Yes, they are all basically the same between makes and models of cars, so you do not have to worry about compatibility issues if you use generic parts. A brake line fitting assortment can help you find what you need.
What size brake line fittings are on a 2001 Toyota Tacoma?
The brake line has (1) male & (1) female M10-1.0 inverted flare fittings and is supplied with a retention clip. DOT-approved extended brake lines – suitable for lifts up to 3.5″ [89 mm].
What size fittings do I need for brake lines?
Almost every car or truck worldwide utilizes a 3/16-inch brake line, also referred to as a CNF-3. The other most common brake line is the ¼ inch. This size was routinely used in the 1950s, so if your truck or car was manufactured in that era, you would need the ¼ inch.
What thread is used on brake line?
The threads for 1/4″ brake lines where a rubber hose screws into a wheel cylinder with a copper gasket ARE the 7/16-20 standard fine thread. 3/16″ lines use standard 3/8-24 threads for both the flare nuts and the gasketed fittings.
What size thread is a 3 8 brake line?
For example, 3/8” x 24NF refers to 3/8” diameter and 24 threads per inch pitch (NF stands for National Fine; other options are NS – National Special and BSF – British Standard Fine).
What is the most common brake line nut size?
Brake line wrenches (often called flare nut wrenches or simply line wrenches) serve a specific purpose in a mechanic’s toolbox. Several styles exist, but determining which brake line wrench is right for my vehicle isn’t really that hard. Most domestic cars use a 7/16-in. size, while imports typically use a 10 mm.
What size are Toyota brake line nuts?
Brake line tube nuts (M10 x 1.0 size)
What size thread is a 1 4 brake line?
7/16″-24 thread
7/16″-24 thread. To be used with 1/4″ brake line tubing.
What brake line flare does Toyota use?
Toyota Brake Flare Type
Toyota brake tube ends need a double flare, also known as an inverted flare. You should not confuse this with a bubble flare or a single flare. If you try to use bubble/single flares on your brake components they will leak.
