What size are the wheel nuts on a Subaru Legacy?

The size of the wheel nuts on a Subaru Legacy can vary depending on the specific model and year. It is recommended to refer to the owner’s manual or consult with a trusted mechanic to determine the exact size of the wheel nuts for a specific Subaru Legacy model.
However, it is worth noting that the bolt pattern for the Subaru Legacy is 5×100 for models from 1989 through 2014, and 5×114.3 for models from 2015 onwards. The bolt pattern refers to the number of lug nuts on each wheel and the size of the circle in which they are set.
For more detailed information about the lug nut size, it is advisable to consult the owner’s manual or refer to online resources such as the Subaru Legacy lug nut size chart.

What size are the wheel nuts on a 2011 Subaru Legacy?

Thread size: M12-1.25.

How do I know my wheel nut size?

You can easily identify your thread size and pitch with a simple thread pitch gauge available at any hardware store, or you can simply take one of your lug nuts to your local hardware store and spin it onto the bolts they have on hand.

Are Subaru lug nuts metric or standard?

Yes, almost all Subaru cars use metric bolts. The thread sizes of the lug nuts will vary based on the wheel studs. Therefore, you need metric Subaru lug nuts to fully secure the wheels. For example, the most common metric thread sizes of Subaru bolts are M12x1.

What size is a wheel nut socket?

OEM wheel bolts are usually 19mm socket, but many aftermarket ones are 17mm. Look for impact sockets with a plastic sleeve to help protect your wheels. You wouldn’t need all 3, but something like this…. they are usually 1/2″ drive with the sleeve though.

What thread are Subaru lug nuts?

Subaru and Nissan do something a little different than the other manufacturers; they use a 1.25 thread pitch. All of the other Japanese manufacturers use a 1.5 thread pitch.

What size are Subaru wheel nuts?

To remove and install Subaru lug nuts, you’ll need a 19mm socket. This fits the standard 12mm x 1.25 nuts. So the common socket sizes are: 12×1.25mm lug nuts: 19mm socket.

How do I know my lug nut size?

You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.

Are all Subaru wheel studs the same?

No, not all Subaru lug nuts are the same. There are various wheel nuts for Subaru in the market. Most Subaru vehicles use steel wheel nuts. The most common thread sizes that are used by Subaru cars are M12x1.

What size are the lug nuts on a Subaru Legacy GT?

Dorman – Pik-a-Nut – Wheel Lug Nut: M12-1.25 Thread, Conical 60, Standard, 0.63″ Length, Zinc, 1 Pack (Part No. 99000.1)

What size socket fits a lug nut?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.