What size are the lug nuts on an Acura Integra?

The lug nuts on an Acura Integra have a thread size of M12 X 1.50 and a hex size of 19mm.

What is the bolt pattern on the Integra Type S?

For example, the bolt pattern of a 1988-2023 Integra Type S is 5×114.3mm. Then 5×114.3 wheel spacers are the best for the Type-R/ A-Spec/ Type S tires. But the bolt pattern of a 2024+ Integra Type S is 5x120mm.

What size socket is the lug nut on a Acura TSX?

They’re 12mm x 1.5″ lugs and the size of socket you’ll need to remove them is 3/4″.

What size are the lug nuts on a Acura Integra GSR?

M12x1. 5 Open End Bulge Acorn Lug Nut – 19mm Hex – 60 Degree Cone Seat.

How do I know my lug nut size?

You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.

What size socket is my lug nut?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size do you have to be to remove lug nuts?

For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

What size impact wrench do I need to remove lug nuts?

A 1/2-inch impact wrench is essential for any heavy-duty automotive work. We tested a bunch of the most popular brands on the market; here are the ones to buy. A tool’s value lies in its ability to ease demanding tasks. Among power tools, the impact wrench stands out for removing stubborn lug nuts and rusted bolts.

What is the thread pitch of the lug nuts on a 1996 Acura Integra?

The lug nuts on an Acura Integra ar M12 X1. 50 with a 19mm hex size. The M12 X1. 50 is the thread pitch for the lug nuts, and the 19mm is the size socket that You will need to remove and install Your lug nuts.

What size are the lug nuts on an Acura?

Most Acura vehicles use steel wheel nuts. The most common thread sizes that are used by Acura cars are M14x1. 5mm and M12x1.

What size are the lug nuts on a 2024 Integra Type S?

The socket size of an Acura Integra Type S lug nut is 13/16″, so you would need a 22mm hex socket to fit. Once you get the new aftermarket wheels, there is a high chance you need some new aftermarket lug nuts.