Lug Nut Size for Honda Prelude
The lug nut size for a Honda Prelude is 12mm x 1.5. This is the standard size for the lug nuts on a Honda Prelude, and it is important to ensure that any replacement lug nuts match this size to ensure proper fit and safety.
If you have any further questions or need additional assistance, feel free to ask!
Contents
- What size lug nuts do Hondas use?
- What size rims are on a 2001 Honda Prelude?
- Are all Honda bolts metric?
- Are all lug nuts standard size?
- What size are the lug nuts on a 2000 Honda Prelude?
- What size do you have to be to remove lug nuts?
- What size socket do I need for lug nuts?
- What size are the wheel nuts on a Honda Prelude?
- How do I know my wheel nut size?
- How do I know my lug nut size?
What size lug nuts do Hondas use?
The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.
What size rims are on a 2001 Honda Prelude?
16″ diameter, 6.5″ width2001 Honda Prelude / Wheel size
The stock rim IS 6.5″ wide. 215 Azines will fit fine.
Are all Honda bolts metric?
Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware.
Are all lug nuts standard size?
No. Lug nut sizes depend on the car’s manufacturer, & depends on whether that manufacturer uses ASE standard nuts or metric nuts. Common ASE standard nuts are 7/16, 1/2, 9/16, & 5/8 inches. Metric standard nuts are 17, 19, 21, 22, & 23 millimeters.
What size are the lug nuts on a 2000 Honda Prelude?
Thread size: M12-1.50. Verify lug nut to wheel mating surface for proper and safe fitment.
What size do you have to be to remove lug nuts?
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
What size socket do I need for lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size are the wheel nuts on a Honda Prelude?
Dorman – Wheel Lug Nut: M12-1.50 Thread, Radius, Standard, 0.768″ Length, Chrome (Sold by each) (Part No. 611-144)
How do I know my wheel nut size?
The thread size or thread diameter is the measurement taken across the outside diameter of your wheel stud threads measured in either standard (7/16″, 1/2″, etc.) or metric (12mm, 14mm, etc.) dimensions. The most common thread sizes are 10mm, 12mm, 14mm, 7/16″, 1/2″, 9/16″, 5/8″.
How do I know my lug nut size?
You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.
