What size are the lug nuts on a Honda Pilot?

Lug Nut Size on a Honda Pilot
The most common thread size of lug nuts on a Honda Pilot is M14x1.5mm. However, the seat type is determined by the actual wheel lug seat style. Aftermarket Honda Pilot lug nuts are flexible in different seat types, allowing them to fit a vast number of alloy rims.
It’s important to note that the 2016+ Honda Pilot uses a 22mm lug nut socket size.

Is there a standard lug nut size?

Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size lug nut is on a Honda Pilot?

The most common thread size of Honda Pilot lug nuts is M14x1. 5mm. But the seat type is determined by the actual wheel lug seat style. Aftermarket Honda Pilot lug nuts are flexible in different seat types which allow the nuts to fit a vast number of alloy rims.

What size socket is a 2016 Honda Pilot lug nut?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

Are all Honda bolts metric?

Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware.

What size lug nuts do Hondas use?

The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.

What size are the lug nuts on a 2018 Honda Pilot?

14 mm x 1.50 thread size, 3/4″ and 13/16″ hex.

Can you use a socket wrench on lug nuts?

Yes, provided that: You have the correct size socket, and it is long enough to fit securely over the wheel lugs. Your socket wrench is sturdy, with a long handle to apply the needed force.

What size socket do I need for lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

Do you need a special socket to remove lug nuts?

Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.

How do I know my lug nut size?

You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.