What size are the lug nuts on a Honda Odyssey?

The lug nuts on a Honda Odyssey are typically conical seat wheel nuts with a 60-degree taper. They are cone-shaped seating types that help center the lug onto the wheel when tightened. The specific size of the lug nuts may vary depending on the model year of the Honda Odyssey. Here is a list of lug nut sizes for different model years:
– 2003-2010 Honda Odyssey: M14 X 1.5, 22mm socket
– 2011-2024 Honda Odyssey: M14 X 1.5, 22mm socket
Please note that it’s always a good idea to double-check the lug nut size for your specific vehicle model and year to ensure accuracy.

What size are the wheel nuts on a 2015 Honda Odyssey?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

What size socket do I need to remove wheel nuts?

19mm socket is what you need – locking nut and standard all the same size.

What size socket is my lug nut?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size are the lug nuts on a 2015 Honda Odyssey?

Verify lug nut to wheel mating surface for proper and safe fitment. Thread size: M14-1.50.

Are Honda bolts standard or metric?

metric system
Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware. You’ve just narrowed down your search to a single aisle. Most metric bolts you’ll find in the hardware store are stamped with some sort of marking.

What size are the lug nuts on a 2016 Honda Odyssey?

7/8″ hex
Notes: Nut. 14 mm x 1.50 thread size, 7/8″ hex.

What size socket are the lug nuts on a Honda Odyssey?

The most common thread sizes that are used by Odyssey RC1/ RC2/ RC4 are M12x1. 5mm. However, the Odyssey RL6 uses M14x1. 5 lug nuts.

What size socket do I need for lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size lug nuts do Hondas use?

The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.

What size are the lug nuts on a 2014 Honda Odyssey?

Thread size: M14-1.50.