What size are the lug nuts on a Honda HR-V?

Lug Nut Size for Honda HR-V
The lug nut size for a Honda HR-V is M12x1.5mm. This thread size is crucial for ensuring that aftermarket wheel nuts can be safely installed, as the thread pitches must match for proper installation.
It’s important to note that the seat type of the lug nuts is determined by the actual wheel lug seat type, and it’s essential to use the correct lug nut torque to properly secure the wheel and avoid stripped or cross-threaded lug nuts.
If you’re looking for the lug nut socket size, you can find it by looking for a small stamping on the side of one of the lug nuts. The number next to this stamping is your car’s lug nut socket size. Alternatively, you can access the information through a Honda HR-V lug nut size chart.
In addition, Advance Auto Parts offers a variety of Wheel Lug Nut and Locking Wheel Lug Nut products for the Honda HR-V, with options from trusted brands such as Dorman, McGard, and more ,.
Overall, it’s essential to ensure that the lug nuts fit the vehicle and meet your requirements perfectly, especially when considering aftermarket wheels.

What size lug nuts do I have?

You can easily identify your thread size and pitch with a simple thread pitch gauge available at any hardware store, or you can simply take one of your lug nuts to your local hardware store and spin it onto the bolts they have on hand.

What size are the lug nuts on a Honda HR-V 2024?

The thread size of Honda HR-V lug nuts is M12x1. 5mm.

Is there a standard lug nut size?

Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size is the wheel nut on a Honda HR-V?

Dorman Wheel Nut 611-201.1
Thread size: M12-1.50.

Does wheel nut size matter?

Alloy wheels do use specific nuts and bolts depending on the manufacturer of your car or if you have purchased aftermarket alloys for your car. The most common things for you to check when buying a new set of alloy wheel nuts or bolts is the thread size and seat type.

What size socket is a 2016 Honda HRV lug nut?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex.

What size socket is my lug nut?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size lug nuts do I need?

You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.

Are Honda bolts standard or metric?

metric system
Aside from the U.S., most countries use the metric system for classifying hardware, which means your Honda is assembled with metric hardware. You’ve just narrowed down your search to a single aisle. Most metric bolts you’ll find in the hardware store are stamped with some sort of marking.

What size lug nuts do Hondas use?

The factory lug nuts on most Honda Civics are 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Honda uses this sizing for many of their models, including the Civic, Accord, CR-V, and more. From the mid-1990s onward, most Civics use the 12×1.5 size.