What size are the lug nuts on a Ford Kuga?

Lug Nut Size for Ford Kuga
The lug nut size for a Ford Kuga is 19mm. This size is commonly used for securing the wheels on the vehicle.
If you have any more questions or need further assistance, feel free to ask!

What size impact wrench do I need to remove lug nuts?

1/2 inch
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

What size are Ford wheel bolts?

This set of alloy wheel nuts are designed to fit Ford alloy wheels. With a 60 degree taper seat diameter 28mm. M12 x 1.5 thread size and 19mm Hex.

Are all Ford wheel nuts the same size?

Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.

What size are the wheel nuts on a 2011 Ford Kuga?

5 Fits Ford Kuga 2008-2012 Models Set 4 Locks Alloys Antitheft Protection Bolts T2-FHO/B.

Does Ford use metric or standard sockets?

metric
Are Ford bolts metric or standard? Yes. Ford has sourced both for various vehicle over the years. While it’s a general trend that the newest cars are all metric, there are stubborn applications where older “standard” bolts are still used.

What size socket is a Ford lug nut?

To remove and install Ford F150 lug nuts, you’ll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.

What size are Ford Kuga wheel nuts?

19mm Hex
Additional information

Hex Size	19mm Hex
Thread Size	M12 x 1.5
Seat	Tapered Seat
Type	Wheel nuts
Finish	Zinc Plated

What size socket do I need for lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

Are all Ford locking nuts the same?

The short answer is ‘No’, there are hundreds of different Ford Locking Wheel Nut Key combinations. But there are 4 Main Types of Ford Locking Wheel Nut Key styles.

Are Ford lug nuts metric or standard?

Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.