The lug nut size on a Dodge Nitro is M12 x 1.5 with a 19mm hex.
Contents
- How do I know my lug nut size?
- What size are wheel lug nuts?
- What is the lug pattern on a Dodge Nitro?
- What size are the wheel nuts on a Dodge Nitro?
- What size rims are on 2008 Dodge Nitro?
- Do you need a special socket for lug nuts?
- What size socket is my lug nut?
- What size impact wrench do I need to remove lug nuts?
- What size is a Dodge bolt pattern?
- Are Dodge and Chevy lug patterns the same?
How do I know my lug nut size?
You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.
What size are wheel lug nuts?
The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What is the lug pattern on a Dodge Nitro?
5×114.3
5 (5×114. 3) bolt pattern.
What size are the wheel nuts on a Dodge Nitro?
1/2″-20 Open End Bulge Acorn Wheel Lug Nut (3/4″ Hex – Conical Seat)
What size rims are on 2008 Dodge Nitro?
16-17″ diameter, 7″ width2008 Dodge Nitro / Wheel size
Do you need a special socket for lug nuts?
Deep impact sockets are designed for lug nuts and bolts with exposed threads that are too long for standard sockets. Deep sockets are longer in length therefore can reach lug nuts and bolts that standard sockets are unable to reach. Deep impact sockets are suitable for a wider range of applications.
What size socket is my lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size impact wrench do I need to remove lug nuts?
A 1/2-inch impact wrench is essential for any heavy-duty automotive work. We tested a bunch of the most popular brands on the market; here are the ones to buy. A tool’s value lies in its ability to ease demanding tasks. Among power tools, the impact wrench stands out for removing stubborn lug nuts and rusted bolts.
What size is a Dodge bolt pattern?
The Dodge Charger bolt pattern for the years 1966-1978 is 5×4.5″ (5×114.3mm). Model years 1982-1987 have a Dodge Charger lug pattern of 4×3.94″ (4x100mm). Lastly, the Dodge Charger bolt pattern for the model years 2005 to present are 5×4.53″ (5x115mm).
Are Dodge and Chevy lug patterns the same?
If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs. In fact I think that’s what you’ll run into going from Chevy to dodge.
