What size are the lug nuts on a Dodge Challenger?

Dodge Challenger Lug Nut Size
The lug nut size for a Dodge Challenger is 14mmx1.50. The lug wheel pattern is 5×115, and it’s important to use a 21MM deep impact socket (6 point) to remove/replace the lugs. Using a 12 point socket may fit correctly but can cause damage to the lug nut finish due to high torque. The torque for R/T wheel lugs is 100 ft.lbs cold and for SRT wheel lugs is 110 ft.lbs cold. It’s also worth noting that the lug nuts are acorn bulge with a 13/16 hex and the Mopar part number is 06507826AA.
If you need replacement lug nuts and don’t want to go with the OEM, you can try the Gorilla lug nuts, which have a very positive reputation. These run at $7.40 for a set of 4, and you can get the longer ones if you’re into making your Challenger look showy.
It’s important to use the correct size socket to avoid damage to the lug nut finish. A 21mm 6 point socket is recommended, and using a 12 point socket can potentially round out the lug nuts.
In summary, the lug nut size for a Dodge Challenger is 14mmx1.50, and it’s crucial to use the appropriate socket size and torque specifications for safe and proper fitment [[5]].

What size lugs are on a Dodge Charger?

Lug Pattern for a Dodge Charger: Center Bore & Lug Nuts
During these model years the bolt pattern for a Dodge Charger is 5×4.5″ (5×114.3mm) and the center bore is 71.6 mm, and there are five lug nuts with 1/2″ – 20 UNF thread size.

What size are the lug nuts on a 2015 Dodge Challenger?

The 2015 Dodge Challenger lug nut size is 22 mm hex. Making sure Your tires are in the greatest of condition is key to not crashing.

What size are the lug nuts on a 21 Challenger?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

What is the standard lug nut size?

Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size socket is a Dodge Challenger lug nut?

The socket sizes of Dodge Challenger lug nuts are 13/16″. In other words, you would need a 22mm hex socket to fit.

Do you need a special socket for lug nuts?

Deep impact sockets are designed for lug nuts and bolts with exposed threads that are too long for standard sockets. Deep sockets are longer in length therefore can reach lug nuts and bolts that standard sockets are unable to reach. Deep impact sockets are suitable for a wider range of applications.

How do I know my lug nut size?

You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.

What size are the lug nuts on a 2014 Challenger?

14 mm x 1.50 thread size, 13/16″ hex.

What size socket is a 2018 Dodge Charger lug nut?

M14x1. 5 Open End Bulge Acorn Lug Nut – 22mm Hex – 60 Degree Cone Seat.

What size are the lug nuts on a 2018 Challenger?

25.4 mm lug outside diameter. Verify lug nut to wheel mating surface for proper and safe fitment. Thread size: M14-1.50.