The lug nut size on a 2005 Acura TSX is 12mm x 1.5. The socket size needed to remove them is 3/4″ or 19mm.
Contents
- What size socket do I need for lug nuts?
- What lug pattern is a Acura TSX?
- What size do you have to be to remove lug nuts?
- What is the standard thread for lug nuts?
- What size thread is the wheel stud on a Acura TSX?
- How do I know what size lug nuts I need for my car?
- What size are the lug nuts on a Acura TSX?
- Do you need a special socket to remove lug nuts?
- How do I know my lug nut size?
- What size are the lug nuts on an Acura?
What size socket do I need for lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What lug pattern is a Acura TSX?
What is the bolt pattern for the Acura TSX? The Acura TSX typically comes with a 5×114. 3 bolt pattern, AKA the 5×4. 5 bolt pattern.
What size do you have to be to remove lug nuts?
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
What is the standard thread for lug nuts?
The thread size or thread diameter is the measurement taken across the outside diameter of your wheel stud threads measured in either standard (7/16″, 1/2″, etc.) or metric (12mm, 14mm, etc.) dimensions. The most common thread sizes are 10mm, 12mm, 14mm, 7/16″, 1/2″, 9/16″, 5/8″.
What size thread is the wheel stud on a Acura TSX?
Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread (Sold by each) (Part No. 610-269)
How do I know what size lug nuts I need for my car?
The first number of each item is the thread size and the second number is the number of threads. You can get the size of your lug nuts by checking your owner’s manual or by using a thread pitch gauge to measure it.
What size are the lug nuts on a Acura TSX?
M12 x 1.5. 3/4 Hex.
Do you need a special socket to remove lug nuts?
Use a lug wrench to remove lug nuts.
Lug wrenches should fit the lug nuts used on your wheel assembly perfectly, and in most cases you shouldn’t need other tools to remove them.
How do I know my lug nut size?
You can get the lug nut’s thread size by measuring the diameter of the stud it matches. Since these measurements tend to be of small circular surfaces and need to be precise, dial or digital calipers are the best tools for the job. Your vehicle may use SAE or metric: Common SAE sizes are 7/16, 1/2, 9/16 and 5/8.
What size are the lug nuts on an Acura?
Most Acura vehicles use steel wheel nuts. The most common thread sizes that are used by Acura cars are M14x1. 5mm and M12x1.
