The brake line fittings on a Toyota Tacoma are 10mm x 1.0 .
Contents
- What size brake line fittings are on a 2001 Toyota Tacoma?
- What is the most common brake line nut size?
- What size fittings do I need for brake lines?
- Are all brake line fittings the same?
- What size are Toyota brake line fittings?
- What type of fitting do brake lines use?
- What size thread is a 3 8 brake line?
- What type of fitting for Toyota brake lines?
- How do you identify brake line fittings?
- What are the two types of brake line fittings?
What size brake line fittings are on a 2001 Toyota Tacoma?
The brake line has (1) male & (1) female M10-1.0 inverted flare fittings and is supplied with a retention clip. DOT-approved extended brake lines – suitable for lifts up to 3.5″ [89 mm].
What is the most common brake line nut size?
Brake line wrenches (often called flare nut wrenches or simply line wrenches) serve a specific purpose in a mechanic’s toolbox. Several styles exist, but determining which brake line wrench is right for my vehicle isn’t really that hard. Most domestic cars use a 7/16-in. size, while imports typically use a 10 mm.
What size fittings do I need for brake lines?
Almost every car or truck worldwide utilizes a 3/16-inch brake line, also referred to as a CNF-3. The other most common brake line is the ¼ inch. This size was routinely used in the 1950s, so if your truck or car was manufactured in that era, you would need the ¼ inch.
Are all brake line fittings the same?
Yes, they are all basically the same between makes and models of cars, so you do not have to worry about compatibility issues if you use generic parts. A brake line fitting assortment can help you find what you need.
What size are Toyota brake line fittings?
Toyota Brake Fitting Size
Toyota brake line fittings are 10mm x 1.0. Toyota bleeders are also 10mm x 1.0.
What type of fitting do brake lines use?
Hydraulic brake-fitting adapters are used in a wide range of applications. They connect brake lines to the different diameter ports in a dual master cylinder, combine various types of fitting—such as inverted flare, pipe, and AN or mix standard and metric fittings.
What size thread is a 3 8 brake line?
For example, 3/8” x 24NF refers to 3/8” diameter and 24 threads per inch pitch (NF stands for National Fine; other options are NS – National Special and BSF – British Standard Fine).
What type of fitting for Toyota brake lines?
The standard Toyota brake line fitting is 10mmx1.
Most fittings take a 10mm wrench for the hard lines (the male fittings) and 14mm for the female fittings. If you’re replacing stock soft lines for extended Toyota brake lines you’ll need both 10mm and 14mm to separate them.
How do you identify brake line fittings?
Identifying your brake line fittings consists of three steps:
- Identify the thread sizes.
- Identify the end configurations.
- Identify the fittings group and type.
What are the two types of brake line fittings?
There are two basic types of passenger vehicle brake line flares: the double flare (also called the inverted flare) and the bubble flare (also known as the metric flare). It is important to know that these two flare forms are not interchangeable.
