Based on the search results, it seems that the brake line fittings on a Honda CRX are 3/16″ in diameter .
Contents
- What is the most common brake line nut size?
- Are all brake line fittings the same?
- What size brake line fittings?
- What size thread is a 3 8 brake line?
- What are the two types of brake line fittings?
- What are brake line fittings called?
- What type of fitting do brake lines use?
- How do you tell what size an fitting you have?
- How do I know my brake line size?
- What size are Honda brake line fittings?
What is the most common brake line nut size?
Brake line wrenches (often called flare nut wrenches or simply line wrenches) serve a specific purpose in a mechanic’s toolbox. Several styles exist, but determining which brake line wrench is right for my vehicle isn’t really that hard. Most domestic cars use a 7/16-in. size, while imports typically use a 10 mm.
Are all brake line fittings the same?
Yes, they are all basically the same between makes and models of cars, so you do not have to worry about compatibility issues if you use generic parts. A brake line fitting assortment can help you find what you need.
What size brake line fittings?
Almost every car or truck worldwide utilizes a 3/16-inch brake line, also referred to as a CNF-3. The other most common brake line is the ¼ inch. This size was routinely used in the 1950s, so if your truck or car was manufactured in that era, you would need the ¼ inch.
What size thread is a 3 8 brake line?
Imperial thread diameter is measured in fractions of an inch and imperial pitch is measured in threads per inch (TPI). For example, 3/8” x 24NF refers to 3/8” diameter and 24 threads per inch pitch (NF stands for National Fine; other options are NS – National Special and BSF – British Standard Fine).
What are the two types of brake line fittings?
Center Support Fitting (bracket) Male Fitting. Female Fitting.
What are brake line fittings called?
There are 5 main fittings out there used for automotive projects: tube nuts, unions, bleeder screws, compression fittings, and adapters. Each is used for a different purpose in the vehicle. For example, bleeder screws are exclusively used on calipers, while compression fittings are used for lower-pressure lines.
What type of fitting do brake lines use?
Hydraulic brake-fitting adapters are used in a wide range of applications. They connect brake lines to the different diameter ports in a dual master cylinder, combine various types of fitting—such as inverted flare, pipe, and AN or mix standard and metric fittings.
How do you tell what size an fitting you have?
As mentioned earlier, you can always identify AN fittings based on the male thread size (outside diameter). These sizes are constant regardless of brand, hose type, or fitting configuration. If your fitting has a convex 37 degree flare at the end, the threads will tell you the AN size (and vice-versa).
How do I know my brake line size?
Look at the master cylinder where the lines are near each other to see if there are two sizes of tubing. You can also use a 1/4″ open end wrench to gauge your lines. It will fit easily onto 1/4″ line and will bang back and forth on 3/16″ line.
What size are Honda brake line fittings?
Brake lines on the master to ABS are usually 1/4″ (6.35mm), the smaller lines to wheels are usually 3/16″ (4.75mm).
