Brake Caliper Bolt Size for Chevy Silverado
The brake caliper bolt size for Chevy Silverado models produced between 1999 and 2019 is M14 x 2.00 x 37mm. This universal bolt size is used for almost all Chevrolet Silverado model years to eliminate confusion among riders.
If you have a specific model or year, it’s essential to check the Silverado brake caliper bracket bolt size before selecting and installing bolts to the caliper brackets of your certain Chevy vehicles.
For torque specifications, the two 18mm bolts hold the front caliper, and the size of the bolts for the rear caliper may vary depending on the specific model and year.
It’s important to ensure the correct size and specifications for your specific Chevy Silverado model when working on the brake caliper bolts.
Contents
- What size are brake caliper bracket bolts?
- What size socket do I need for brake calipers?
- What do you use for brake caliper bolts?
- What tool do you use to remove caliper bolts?
- What size is the bolt on the front caliper of a 2002 Chevy Silverado?
- What size is the bolt on the front brake caliper bracket of a Chevy Silverado?
- What are the bolts on a brake caliper?
- What size are disc brake caliper bolts?
- Should I put loctite on my brake caliper bolts?
- What size bolt is a 2003 Chevy Silverado caliper?
What size are brake caliper bracket bolts?
A: The exact measurements of the bolt are 1.55″ x 0.43″ x 0.83″ (L x thread diameter x thread length).
What size socket do I need for brake calipers?
What size wrench do i need to take the front calipers off to replace my brake pads? Welcome and thank you for allowing me to assist you! to remove the caliper bolts from the bracket, you will need either a 13mm or 15mm socket wrench.
What do you use for brake caliper bolts?
If anything, you could use white lithium grease. My biggest problem with caliper bolts is that they fall out. Make sure to use blue loctite when you put them back in.
What tool do you use to remove caliper bolts?
The OTC 7302-1 allows for removal of inboard facing pins or bolts to be removed from the outboard side of the brake caliper or vehicle component. For caliper pin removal, simply back the pin bolt out half way and place the tool over the bolt shank to strike against the bolt head.
What size is the bolt on the front caliper of a 2002 Chevy Silverado?
M14 x 2.00 x 39.75 mm.
What size is the bolt on the front brake caliper bracket of a Chevy Silverado?
M14 x 2.00 x 39.75 mm.
What are the bolts on a brake caliper?
The brake caliper bolt, also known as the caliper bracket bolt or the caliper mounting bolt, secures the brake calipers to the steering knuckle brackets.
What size are disc brake caliper bolts?
Size ： M6 * 18mm，6 pieces. Weight ：6g (single). Screw head diameter: 6 mm.
Should I put loctite on my brake caliper bolts?
The caliper bolts & guide pin mounting screws need to have the medium strength (blue) loctite applied to the threads !
What size bolt is a 2003 Chevy Silverado caliper?
M16 x 2.00 x 41.30.
