Subaru Lug Nut Size
The lug nut size for Subaru vehicles is M12-1.25, with a hex size of 19mm . This specification is consistent across various Subaru models, including the Outback, WRX, Impreza, Forester, BRZ, and Legacy. It’s important to ensure that the lug nuts used match this size to ensure proper fit and safety for the vehicle’s wheels.
If you have any more questions or need further assistance, feel free to ask!
Contents
- Are Subaru lug nuts metric or standard?
- What size socket do I need for lug nuts?
- Are all Subaru wheel studs the same?
- What is the standard lug nut size?
- What size thread is a Subaru wheel stud?
- What is the diameter of a Subaru lug?
- What size socket for Subaru crosstrek lug nuts?
- Are Subaru lug nuts metric?
- What size socket do I need to remove Subaru lug nuts?
- What size socket do I need for my lug nuts?
Are Subaru lug nuts metric or standard?
Yes, almost all Subaru cars use metric bolts. The thread sizes of the lug nuts will vary based on the wheel studs. Therefore, you need metric Subaru lug nuts to fully secure the wheels. For example, the most common metric thread sizes of Subaru bolts are M12x1.
What size socket do I need for lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Are all Subaru wheel studs the same?
No, not all Subaru lug nuts are the same. There are various wheel nuts for Subaru in the market. Most Subaru vehicles use steel wheel nuts. The most common thread sizes that are used by Subaru cars are M12x1.
What is the standard lug nut size?
Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size thread is a Subaru wheel stud?
Nearly all Japanese cars use 12mm lug nuts and studs. This is the diameter of the threaded section of the stud. Subaru and Nissan do something a little different than the other manufacturers; they use a 1.25 thread pitch. All of the other Japanese manufacturers use a 1.5 thread pitch.
What is the diameter of a Subaru lug?
The lug nuts on most Subaru Outback models from 2010 to 2022 are 12×1.25mm. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.25mm. Some international market Outbacks may also have different sized lug nuts, so always check your owner’s manual if you’re unsure.
What size socket for Subaru crosstrek lug nuts?
To remove the lug nuts on your 2024 Crosstrek, you’ll need a 19mm 6-point socket, also known as a 19mm hex socket.
Are Subaru lug nuts metric?
Subaru uses a mix of standard and metric bolts when it comes to their lug nuts. Generally speaking, most Subaru models will have either 14mm or 17mm lug nuts. Certain Subarus may require an additional adapter to fit the lug nut correctly.
What size socket do I need to remove Subaru lug nuts?
To remove and install Subaru lug nuts, you’ll need a 19mm socket.
What size socket do I need for my lug nuts?
4) Socket Sizes
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
