Honda Brake Line Size
The size of the brake line used in Honda vehicles for brakes is 3/16ths and the male fittings are 10×1.0 metric fittings. This information should help in selecting the correct brake line for your Honda vehicle.
Contents
- Is 3 16 brake line the same as 4.75 mm?
- What size thread is a 3 8 brake line?
- What size are Honda brake line fittings?
- How do you identify brake line fittings?
- What is the most common brake line wrench size?
- What size wrench do I need for a brake line?
- Are all brake line fittings the same?
- How do I know my brake line size?
- What size is a standard brake line?
- What is 3 8 standard thread?
Is 3 16 brake line the same as 4.75 mm?
The two most common brake lines found are 3/16″/4.75mm and 1/4″. The smaller size is 3/16″/4.75mm brake line, CNF-3; and the larger size is 1/4″, CNF-4. 3/16″ is found on virtually all cars and trucks made in the world.
What size thread is a 3 8 brake line?
Imperial thread diameter is measured in fractions of an inch and imperial pitch is measured in threads per inch (TPI). For example, 3/8” x 24NF refers to 3/8” diameter and 24 threads per inch pitch (NF stands for National Fine; other options are NS – National Special and BSF – British Standard Fine).
What size are Honda brake line fittings?
Brake lines on the master to ABS are usually 1/4″ (6.35mm), the smaller lines to wheels are usually 3/16″ (4.75mm).
How do you identify brake line fittings?
Identifying your brake line fittings consists of three steps:
- Identify the thread sizes.
- Identify the end configurations.
- Identify the fittings group and type.
What is the most common brake line wrench size?
Brake line wrenches (often called flare nut wrenches or simply line wrenches) serve a specific purpose in a mechanic’s toolbox. Several styles exist, but determining which brake line wrench is right for my vehicle isn’t really that hard. Most domestic cars use a 7/16-in. size, while imports typically use a 10 mm.
What size wrench do I need for a brake line?
Brake line wrenches (often called flare nut wrenches or simply line wrenches) serve a specific purpose in a mechanic’s toolbox. Several styles exist, but determining which brake line wrench is right for my vehicle isn’t really that hard. Most domestic cars use a 7/16-in. size, while imports typically use a 10 mm.
Are all brake line fittings the same?
Yes, they are all basically the same between makes and models of cars, so you do not have to worry about compatibility issues if you use generic parts. A brake line fitting assortment can help you find what you need.
How do I know my brake line size?
1. How do I determine the correct size for my hydraulic brake lines? The size of hydraulic brake lines is determined by the type of brake system and the weight of the vehicle. For most vehicles, the recommended size is 3/16 inch diameter for the front brakes and 1/4 inch diameter for the rear brakes.
What size is a standard brake line?
3/16-inch
Almost every car or truck worldwide utilizes a 3/16-inch brake line, also referred to as a CNF-3. The other most common brake line is the ¼ inch. This size was routinely used in the 1950s, so if your truck or car was manufactured in that era, you would need the ¼ inch.
What is 3 8 standard thread?
Standard Thread Pitch Chart
| Coarse Thread Series – UNC | Fine Thread Series – UNF | |
|---|---|---|
| Nominal Size and Threads Per In. | Basic Pitch Dia. | Nominal Size and Threads Per In. |
| 3⁄8 – 16 | 0.3344 | 3⁄8 – 24 |
| 7⁄16 – 14 | 0.3911 | 7⁄16 – 20 |
| 1⁄2 – 13 | 0.45 | 1⁄2 – 20 |
