What size are Ford wheel bolts?

The size of Ford wheel bolts can vary depending on the specific model and year of the vehicle. However, Ford cars typically use two thread sizes for their wheel bolts: M12 x 1.5 and M14 x 1.5. Most Ford cars use the M12 x 1.5 thread size, while the Ford S-Max and Galaxy models use the M14 x 1.5 thread size. It’s important to note that these sizes are for the wheel bolts and not the lug nuts. The lug nut hole diameter for genuine Ford alloy wheels is slightly wider than standard, with a seat diameter of 28mm. Aftermarket alloy wheels generally have a more standard nut hole width of 23mm or 24mm .

What size socket do I need for wheel nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools.

What size socket do I need to remove wheel nuts?

19mm socket is what you need – locking nut and standard all the same size.

What size are my wheel bolts?

Thread Size You can easily identify your thread size and pitch with a simple thread pitch gauge available at any hardware store, or you can simply take one of your lug nuts to your local hardware store and spin it onto the bolts they have on hand.

Does Ford use metric or standard lug nuts?

Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.

What size is Ford wheel nuts?

Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.

What size are the wheel nuts on a Ford Sierra?

Ford Sierra wheel nuts, compatible replacement parts.
M12x1. 5 thread, 19mm Hex head, 60 degree taper, 30mm overall hieght. Ford Sierra wheel nuts are available in various set quantities, you can choose from the above options. Choose from a single nut to a set of 20.

Are all Ford locking nuts the same?

The short answer is ‘No’, there are hundreds of different Ford Locking Wheel Nut Key combinations. But there are 4 Main Types of Ford Locking Wheel Nut Key styles.

What are the common wheel bolt sizes?

Common ASE standard nuts are 7/16, 1/2, 9/16, & 5/8 inches. Metric standard nuts are 17, 19, 21, 22, & 23 millimeters. They say to re-torque your rims after driving 50-100 miles.

What size socket is a Ford lug nut?

Officially, they are 21mm. I only had a 12 point socket in that size; no way I was going to torque to 150ft-lb on a sloppy fit 12 point socket. 13/16, 6 point socket fits tighter. Buy the best 6 point 13/16″ or 21mm 1/2″ drive IMPACT socket you can afford.

What thread is Ford lug nuts?

M14x1.5
With a thread size of M14x1. 5, the installation process is quick and straightforward.